Specifications
In this article, we will list all known specifications for the Smart+ Spot GU10 Dimmable LED bulb smarthome light from OSRAM. We have categorized this product as spot.
Communication
What would smart devices in our household be if they could not communicate with each other? Most likely not smart! For this reason, OSRAM has provided one or more of the following communication channels for integration:
- Zigbee
Supported functions
The following features/functions are supported by this device:
- Switch the light on or off via your smartphone or the Bridge.
- Change the brightness.
- The luminaire can be configured to emit a white light.
- Automatic switch-on behavior.
Third party integrations
Don't want to use the integration/bridge that the manufacturer OSRAM specifies? That's not a problem. See the list below for all verified integrations that work with Smart+ Spot GU10 Dimmable LED bulb :
- Zigbee2MQTT
- Zigate
- Zigbee home automation
Light
With many lamps, the color temperature can be adjusted via app. In this model, the color temperature ranges from 2700 kelvin to 2700 kelvin. The unit lumen is a measurement to determine the amount of light emitted per given time. Conversely, this means that the higher the lumen, the brighter a lamp shines. As a rule, for example, 500-600 lumens per square meter are sufficient to illuminate a bathroom. For comparison, the Smart+ Spot GU10 Dimmable LED bulb is given as 350. OSRAM has defined the power consumption for the devices described here with 4,5 w. However, the specification may differ from the actual power consumption depending on which colors/color temperatures and brightnesses are set. For example, while manufacturers mostly measure lumens at white color and full brightness, the power consumption might have been measured at slight dimming. However, it would also be possible to measure at full brightness, which could lower the power consumption at 4,5 w. In short, this is an approximate guide from OSRAM.
Design
Unfortunately, in this case, we have to start with bad news regarding the design, because the sustainability aspect was neglected in the light sources installed in the device. The manufacturer did not take the replacement of the bulbs into account, which means that the entire device has to be replaced.
Protection
Additional information