Specifications
In this article, we will list all known specifications for the Tint Reflektor 350lm GU10 RGBCCT Bulb smarthome light from Müller Licht. We have categorized this product as spot.
Communication
What would smart devices in our household be if they could not communicate with each other? Most likely not smart! For this reason, Müller Licht has provided one or more of the following communication channels for integration:
- Zigbee
Supported functions
The following features/functions are supported by this device:
- Switch the light on or off via your smartphone or the Bridge.
- Change the brightness.
- Changing the color temperature like warm or cool white.
- Multiple colors can be selected in the smartphone app.
- The luminaire can be configured to emit a white light.
- Automatic switch-on behavior.
Third party integrations
Don't want to use the integration/bridge that the manufacturer Müller Licht specifies? That's not a problem. See the list below for all verified integrations that work with Tint Reflektor 350lm GU10 RGBCCT Bulb :
- Zigbee2MQTT
- ioBroker
- Zigate
- Deconz
- Zigbee home automation
- Alexa Smart Home
Light
With many lamps, the color temperature can be adjusted via app. In this model, the color temperature ranges from 1800 kelvin to 6500 kelvin. The unit lumen is a measurement to determine the amount of light emitted per given time. Conversely, this means that the higher the lumen, the brighter a lamp shines. As a rule, for example, 500-600 lumens per square meter are sufficient to illuminate a bathroom. For comparison, the Tint Reflektor 350lm GU10 RGBCCT Bulb is given as 350. Müller Licht has defined the power consumption for the devices described here with 4.7 w. However, the specification may differ from the actual power consumption depending on which colors/color temperatures and brightnesses are set. For example, while manufacturers mostly measure lumens at white color and full brightness, the power consumption might have been measured at slight dimming. However, it would also be possible to measure at full brightness, which could lower the power consumption at 4.7 w. In short, this is an approximate guide from Müller Licht.
Design
The first step is the sustainability check: The installed light sources are permanently installed by Müller Licht and thus unfortunately cannot be replaced. Although LEDs consume less power and have a longer lifespan, this is very annoying, especially for larger devices. With bulbs that have the electronics directly installed, a change by the manufacturer is difficult to implement. This is unfortunately a pity, but currently unavoidable. Müller Licht chose plastic as the casing material. The color was kept in white. The device has a weight of 36 g.
Protection
Please be careful when exposing these lights to water, dust or mechanical stress because the Tint Reflektor 350lm GU10 RGBCCT Bulb does not have IP certification.
Additional information