Philips 27M1N3200VA

Display, power consumption, dimensions, technologies used, connections, certifications, comfort features. All these keywords can be relevant for a purchase decision, but an exact comparison is often difficult. For this reason, we will summarize as many of the mentioned specifications as possible in an understandable form in the course of this article. Let's start with the most important component of the 27M1N3200VA from Philips.

Display

Let's start with the size of the actual display. This information is given in inches and measures the screen diagonal of the display. It can happen that displays with the same size specification have different dimensions, since square monitors, for example, can belong to the same category as a widescreen monitor. The monitor from Philips in this article has a size of 27 inches ( 68.4 cm on the diagonal). As already known, two monitors with different outer dimensions can have the same screen diagonal. In the case of the monitor 27M1N3200VA , we find an aspect ratio of 1.778 to 116. This means that for every 116 pixels in height, 1.778 pixels in width are added. For comparison: A classic CRT monitor had an aspect ratio of 4:3. Approximately 89.7 % of the front of the monitor is taken up by the display, while the remaining area consists of screen edges that cannot display any image information. If you want to set up several monitors next to each other, it is advisable to choose monitors with narrow edges. The display is a VA panel. The panel has a resolution of 1920 x 1080 px. The pixel density is 81 ppi. The pixel pitch is 0.311 mm. The continuous possible brightness specified by the manufacturer Philips is 250 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. Philips promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the 27M1N3200VA 30 khz to 200 khz. Vertically, however, the image renews at a minimum rate of 48 hz up to 165 hz. The minimum response time of the monitor is ms. The display panel is Anti-glare/Matte (3H).

Color representation

The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. The coverage of the Adobe RGB 1998 color space is 89 % according to the manufacturer. According to the manufacturer, the coverage of the NTSC 1953 color space is 101 %. According to the manufacturer, the coverage of the SRGB color space is 121 %.

Contrast ratio

Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from Philips has a static contrast ratio of 3000 : 1 , according to the manufacturer.

HDR

The monitor supports all HDR modes listed here:

screen design

The size of the monitor (stand included) is 41.3 x 61.4 x 23.6 cm (HxWxD). The base itself has a depth of 23.6 cm. If you want to place the monitor on a table or even transport it, you should expect a weight of 5.4 kg with the stand screwed in. Without stand, the monitor weighs 3.8 kg.

Power consumption

The average consumption figure for 27M1N3200VA is 25 w. In standby mode, the device consumes approximately 0.5 w. When switched off, on the other hand, the monitor consumes only 0.3 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.

Packaging

The monitor is packaged in a cardboard box measuring 52.1 x 78 x 22.4 cm (height x width x depth). The box together with the monitor weighs about 10.06 kg.

Further information