Philips 27E1N3300A

Display, power consumption, dimensions, technologies used, connections, certifications, comfort features. All these keywords can be relevant for a purchase decision, but an exact comparison is often difficult. For this reason, we will summarize as many of the mentioned specifications as possible in an understandable form in the course of this article. Let's start with the most important component of the 27E1N3300A from Philips.

Display

Let's start with the size of the actual display. This is given in inches and measures the screen diagonal of the display. The monitor 27E1N3300A has a display size of 27 inches ( 68.5 cm on the diagonal). It should be noted, however, that displays in this category can have different dimensions, since square monitors, for example, can have the same diagonal as a widescreen monitor. Let's keep it short and sweet. The monitor has an aspect ratio of 1.778 : 116. In addition to the aspect ratios and the specified screen diagonal, some enthusiasts may also be interested in the ratio between the monitor area and the actual display. This refers to the general ratio between the non-display area and the display. In other words, approximately 90 % of the front surface of the monitor consists of the display, while the rest is made up of screen edges and cannot display an image. When arranging several monitors next to each other, it is advisable to choose models with the narrowest possible edges. The display is a IPS panel. The panel has a resolution of 1920 x 1080 px. The pixel density is 81 ppi. The pixel pitch is 0.311 mm. The continuous possible brightness specified by the manufacturer Philips is 300 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. Philips promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the 27E1N3300A 30 khz to 85 khz. Vertically, however, the image renews at a minimum rate of 48 hz up to 75 hz. The minimum response time of the monitor is ms. The display panel is Anti-glare/Matte (3H).

Color representation

The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. According to the manufacturer, the coverage of the NTSC 1953 color space is 106 %. According to the manufacturer, the coverage of the SRGB color space is 122 %.

Contrast ratio

Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from Philips has a static contrast ratio of 1000 : 1 , according to the manufacturer.

HDR

The monitor supports all HDR modes listed here:

screen design

The monitor has a width of 61.2 cm without its attached stand/stand. The height is dimensioned at about 36.5 cm , while the for the depth of the monitor should be kept free at about 4.3 cm.
The size of the 27E1N3300A on the desk is likely to be particularly relevant for most users. Philips specifies a space requirement of 45.6 x 61.2 x 21.2 cm (HxWxD) with the included stand. The base itself has a depth of 21.2 cm. If you want to place the monitor on a table or even transport it, you should expect a weight of 6.06 kg with the stand screwed in. Without stand, the monitor weighs 4.2 kg. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting.

Power consumption

The average consumption was given by Philips as 25.1 w. In standby mode, the device consumes approximately 0.5 w. When switched off, on the other hand, the monitor consumes only 0.3 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.

Packaging

The monitor is packaged in a cardboard box measuring 52.5 x 78 x 18.6 cm (height x width x depth). The box together with the monitor weighs about 10.14 kg.

Further information