Menu

Vizio D50f-F1

Product image for D50f-F1

Display, power consumption, dimensions, technologies used, connections, certifications, comfort features. All these keywords can be relevant for a purchase decision, but an exact comparison is often difficult. For this reason, we will summarize as many of the mentioned specifications as possible in an understandable form in the course of this article. Let's start with the most important component of the D50f-F1 from Vizio.

Display

Let's start with the size of the display. It is 49 inches ( 1.2570000000000001 m on the diagonal) large and should thus offer enough space for all contents according to Vizio. Let's keep it short and sweet. The monitor has an aspect ratio of 1.778 : 116. In addition to the aspect ratios and the specified screen diagonal, the ratio between the monitor surface and the actual display could also be relevant for some enthusiasts. This ratio represents the general relationship between non-display and display. In other words: Approximately 92 % of the front surface of the monitor consists of the display, while the remaining percent consists of screen edges and is not suitable for image reproduction. If you want to place several monitors next to each other, you should make sure you choose models with the narrowest possible edges. The display is a VA panel. The panel has a resolution of 1920 x 1080 px. The pixel density is 44 ppi. The pixel pitch is 0.571 mm. The panel is illuminated by Direct LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. Vizio promises stable color reproduction moreover within a 178 ° vertical angle. Vertically, however, the image renews at a minimum rate of 50 hz up to 60 hz.

Color space

The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors.

Contrast ratio

Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 200000 : 1 of dynamic contrast ratio for the monitor D50f-F1 cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.

HDR

The monitor supports all HDR modes listed here:

screen design

The following dimensions must be planned for a free-standing stand without attached feet/stand: 65 cm x 1.127 m x 7.6 cm (HxWxD)
The size of the D50f-F1 on the desk is likely to be particularly relevant for most users. Vizio specifies a space requirement of 71 x 1.127 x 25.5 m (HxWxD) with the included stand. The device weighs 12.4 kg with the stand in place. Without stand, the monitor weighs 9 kg. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting.

Rotate, tilt and swivel

The monitor from Vizio cannot be rotated. The monitor cannot be swiveled. This feature could be retrofitted with a third-party stand. A tilt function was not provided by Vizio with the included stand.

Ports

With the built-in 1 RJ45 Ethernet port(s) on the ' D50f-F1 ' monitor, users can establish a wired network connection. This feature provides a stable connectivity option for those who need a reliable network connection, whether for professional tasks or mission-critical applications.

camera

This monitor does not have a camera.

Loudspeaker

Features

WiFi / Bluetooth

This model ( D50f-F1 ) supports Wi-Fi. This wireless network connection allows devices to display content from a smartphone or tablet, for example, or to download apps from an app store, similar to TVs. However, monitors usually do not have this functionality because they are only operated in connection with a notebook or PC. The protocols are supported:

Power consumption

On average, the monitor consumes approximately 47.27 w. In standby mode, the device consumes approximately 0.5 w. The monitor can be operated on a 110v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.

Environment

The monitor has a built-in ambient light sensor, which can be used, for example, to dynamically adjust the brightness of the monitor to the ambient conditions.

Packaging

Additional information

Series
D
network.lan
Released in year
2017 y
Number of speakers
2
Wattage of the speaker
10 w
VESA mount sizes
  • 200x200
This device has speaker?
Wifi Standards
  • 802.11g
  • 802.11n
  • 802.11n (5Ghz)
  • 802.11a
  • 802.11b

We are missing something - Can you help?