Today we will look at the monitor VX2703mh-LED from ViewSonic from the year 2012. Within this article, we will first take a closer look at the most important feature of a monitor -the display-, then the design, and in the next section we will go into the features of the monitor. Of course, power consumption, certifications, connectivity and other important details will also be considered.
Display
Videos and/or other applications can be displayed on the monitor's 27 inches ( 68.5 cm on the diagonal). Let's keep it short and sweet. The monitor has an aspect ratio of 1.778 : 116. In addition to the aspect ratios and the specified screen diagonal, the ratio between the monitor surface and the actual display could also be important for some enthusiasts. This ratio describes the general relationship between the non-display area and the display. In other words, approximately 79.8 % of the front surface of the monitor consists of the display, while the remaining percent consists of screen edges and does not enable image reproduction. When setting up several monitors next to each other, it is advisable to prefer models with the narrowest possible edges. The display is a TN panel. The panel has a resolution of 1920 x 1080 px. The pixel density is 81 ppi. The pixel pitch is 0.311 mm. The continuous possible brightness specified by the manufacturer ViewSonic is 300 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 170 ° (horizontal) viewing angle. ViewSonic promises stable color reproduction moreover within a 160 ° vertical angle. The refresh rate is horizontally seen at the VX2703mh-LED 24 khz to 83 khz. Vertically, however, the image renews at a minimum rate of 50 hz up to 76 hz. The minimum response time of the monitor is ms. The display panel is Anti-glare/Matte (3H).
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from ViewSonic has a static contrast ratio of 1200 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 20000000 : 1 of dynamic contrast ratio for the monitor VX2703mh-LED cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.
HDR
The monitor supports all HDR modes listed here:
screen design
Without the stand, the monitor comes with a width of 64.4 cm , a height of 39 cm and about 5.5 cm.
The size of the VX2703mh-LED on the desk is likely to be particularly relevant for most users. ViewSonic specifies a space requirement of 43.6 x 64.4 x 17.4 cm (HxWxD) with the included stand. The device weighs in total (i.e. also measured with the stand) 5.43 kg. The monitor VX2703mh-LED without the stand weighs 4.93 kg. This weight reduction should be taken into account for wall or arm mounting, since monitor arms have a maximum load capacity. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting.
Rotate, tilt and swivel
The monitor from ViewSonic cannot be rotated. The monitor cannot be swiveled. This feature could be retrofitted with a third-party stand. The monitor VX2703mh-LED offers the option of adjusting the tilt as required to create an ergonomic working environment and reduce visual fatigue. The angle of inclination to the rear is 16. The monitor can be tilted forward by 3 degree.
Ports
The monitor can be connected via 1 VGA ports.
camera
This monitor does not have a camera.
Loudspeaker
Features
WiFi / Bluetooth
Power consumption
The average consumption was given by ViewSonic as 28 w. The maximum power consumption (peak) specified for this monitor is 36 w. In ECO mode, the monitor consumes 17 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
For temperature, the maximum permissible ambient temperature is 35 °C. Below a temperature of 5 °C , the monitor from ViewSonic should again not be used. The humidity must not exceed 80 percent. At least, however, 20 percent humidity.
Packaging
Additional information
- 100x100