Display, power consumption, dimensions, technologies used, connections, certifications, comfort features. All these keywords can be relevant for a purchase decision, but an exact comparison is often difficult. For this reason, we will summarize as many of the mentioned specifications as possible in an understandable form in the course of this article. Let's start with the most important component of the 49S3A32G from Skyworth.
Display
The display is sized at 48 inches ( 1.2309999999999999 m on the diagonal). As already known, two monitors with different outer dimensions can have the same screen diagonal. In the case of the monitor 49S3A32G , we find an aspect ratio of 1.778 to 116. This means that for every 116 pixels in height, 1.778 pixels in width are added. For comparison: A classic CRT monitor had an aspect ratio of 4:3. If you want to pay attention to special aesthetics or simply want to place several monitors next to each other, you should pay attention to the ratio between display and non-display. The 49S3A32G is a monitor with a ratio of 85 % between usable and non-usable front surface. The display is a IPS panel. The panel has a resolution of 1920 x 1080 px. The pixel density is 45 ppi. The pixel pitch is 0.559 mm. The continuous possible brightness specified by the manufacturer Skyworth is 280 nt. The panel is illuminated by Direct LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. Skyworth promises stable color reproduction moreover within a 178 ° vertical angle. Vertically, however, the image renews at a minimum rate of 50 hz up to 60 hz. The average response time of the monitor is about ms.
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from Skyworth has a static contrast ratio of 1200 : 1 , according to the manufacturer.
HDR
The monitor supports all HDR modes listed here:
screen design
Without the stand, the monitor comes with a width of 1.12 m , a height of 68.1 cm and about 9.4 cm.
If you want to place the monitor described here on the desk without a wall mount, you should allow for 73 x 1.12 x 27.2 m (HxWxD) of space. If you want to place the monitor on a table or even transport it, you should expect a weight of 11.5 kg with the stand screwed in. Without stand, the monitor weighs 11.12 kg. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting.
Rotate, tilt and swivel
The monitor from Skyworth cannot be rotated. The monitor cannot be swiveled. This feature could be retrofitted with a third-party stand. A tilt function was not provided by Skyworth with the included stand.
Ports
The ' 49S3A32G ' monitor is equipped with 1 RJ45 Ethernet port(s) that allow direct connection to wired networks. This feature opens up the possibility for users to benefit from a stable and potentially higher network speed, especially in situations where a reliable Internet connection is essential.
camera
This monitor does not have a camera.
Loudspeaker
Features
WiFi / Bluetooth
Power consumption
The average consumption was given by Skyworth as 77 w. In standby mode, the device consumes approximately 0.5 w. When switched off, on the other hand, the monitor consumes only 0.5 w. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
Packaging
Additional information
- 200x200