Menu

Sharp LC-32FI5342E

Product image for LC-32FI5342E

Within this article we will take a closer look at the technical specifications of the LC-32FI5342E monitor from Sharp. For this we will talk about all possible categories that could be relevant. To start with, we will look at the display, talk about the design and in the next section we will go into the features of the monitor. Other features such as power consumption, connectors and certifications will follow later in the text.

Display

Let's start with the most important component of a monitor, the display. Depending on the aspect ratio of height and width, monitors can be rather wide or square, for example. Besides the pure physical dimensions, the resolution of the display and thus the quality of the display is also decisive here. For easy comparability, however, screen sizes are usually given in inches. This unit of measurement simply compares the diagonal length from the lower left to the upper right corner of the display and is thus universally applicable. This device has a screen diagonal of 31 inches ( 80.1 cm on the diagonal). Let's keep it short and sweet. The monitor has an aspect ratio of 1.778 : 1. Approximately 85.6 % of the front of the monitor is taken up by the display, while the remaining area consists of screen edges that cannot display any image information. If you want to set up several monitors next to each other, it is advisable to choose monitors with narrow edges. The panel has a resolution of 1920 x 1080 px. The pixel density is 69 ppi. The pixel pitch is 0.364 mm. The panel is illuminated by Direct LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. Sharp promises stable color reproduction moreover within a 178 ° vertical angle. Vertically, however, the image renews at a minimum rate of 50 hz up to 60 hz.

Color space

The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors.

Contrast ratio

Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 1000000 : 1 of dynamic contrast ratio for the monitor LC-32FI5342E cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.

HDR

The monitor supports all HDR modes listed here:

screen design

For a possible wall mounting or comparison to the currently owned monitor at the beginning, the dimensions of the monitor without stand/feet: 43.7 cm x 73.2 cm x 8.4 cm (HxWxD)
The size of the LC-32FI5342E on the desk is likely to be particularly relevant for most users. Sharp specifies a space requirement of 46.6 x 73.2 x 15.9 cm (HxWxD) with the included stand. The device weighs 7 kg with the stand in place. According to Sharp , you can expect a weight of about 5.3 kg without the stand. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting.

Rotate, tilt and swivel

The monitor from Sharp cannot be rotated. The monitor cannot be swiveled. This feature could be retrofitted with a third-party stand. A tilt function was not provided by Sharp with the included stand.

Ports

The monitor can be connected via 1 VGA ports. The ' LC-32FI5342E ' monitor is equipped with 1 RJ45 Ethernet port(s) that allow direct connection to wired networks. This feature opens up the possibility for users to benefit from a stable and potentially higher network speed, especially in situations where a reliable Internet connection is essential.

camera

This monitor does not have a camera.

Loudspeaker

Features

WiFi / Bluetooth

This model ( LC-32FI5342E ) supports Wi-Fi. This wireless network connection allows devices to display content from a smartphone or tablet, for example, or to download apps from an app store, similar to TVs. However, monitors usually do not have this functionality because they are only operated in connection with a notebook or PC. The protocols are supported: WiFi 802.11b WiFi 802.11g WiFi 802.11n
Wi-Fi Direct is supported by LC-32FI5342E , which is a standard for data transfer between two WLAN devices without a central wireless access point. This functionality makes it possible, for example, to send and display pictures and videos directly to the monitor without a Wi-Fi connection to the router.

Power consumption

On average, the monitor consumes approximately 45 w. The maximum power consumption (peak) specified for this monitor is 70 w. In standby mode, the device consumes approximately 0.5 w. When switched off, on the other hand, the monitor consumes only 0.5 w. In ECO mode, the monitor consumes 31 w. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.

Environment

For temperature, the maximum permissible ambient temperature is 35 °C. Below a temperature of 0 °C , the monitor from Sharp should again not be used.

Packaging

The monitor is packaged in a cardboard box measuring 54.2 x 80.3 x 14.9 cm (height x width x depth). The box together with the monitor weighs about 7 kg.

Additional information

Series
I5340
mount.vesa.200x200
network.lan
Has at least one 3.5mm audio input jack?
The monitor has at least one USB 2 port?
Number of 3.5mm audio input jacks
1
Number of 3.5mm audio output jacks
1
ports.usb.2
2
Released in year
2018 y
Number of speakers
2
Wattage of the speaker
10 w
Supports dLAN?
Has at least one 3.5mm audio output jack?
This device has speaker?

We are missing something - Can you help?