Display, power consumption, dimensions, technologies used, connections, certifications, comfort features. All these keywords can be relevant for a purchase decision, but an exact comparison is often difficult. For this reason, we will summarize as many of the mentioned specifications as possible in an understandable form in the course of this article. Let's start with the most important component of the S223S5LSB from Philips.
Display
Let's start with the size of the display. It is 21 inches ( 54.6 cm on the diagonal) large and should thus offer enough space for all contents according to Philips. The size specification of a monitor refers to the screen diagonal, which is usually specified in inches. It is only comparable to a limited extent for different formats. For example, a conventional 4:3 monitor with the same screen diagonal has 6% less width, but 13% more height and a total of 7% more surface area than a monitor in 16:10 format. Despite the difference in working area, wider monitors are better suited for consuming games or current movies, for example. It is also easier to display several documents simultaneously on widescreen monitors. So, it depends on the current use case whether the aspect ratio of 1.778 : 1 makes sense for the intended use case. Approximately 80.4 % of the front surface of the monitor is taken up by the display, while the remaining part is screen edges that do not allow the image to be displayed. If you want to place several monitors next to each other, it is advisable to choose models with narrow edges. The display is a TN panel. The panel has a resolution of 1920 x 1080 px. The pixel density is 102 ppi. The pixel pitch is 0.248 mm. The continuous possible brightness specified by the manufacturer Philips is 250 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 170 ° (horizontal) viewing angle. Philips promises stable color reproduction moreover within a 160 ° vertical angle. The refresh rate is horizontally seen at the S223S5LSB 30 khz to 83 khz. Vertically, however, the image renews at a minimum rate of 56 hz up to 76 hz. The minimum response time of the monitor is ms. The display panel is Glossy.
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from Philips has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 10000000 : 1 of dynamic contrast ratio for the monitor S223S5LSB cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio. The monitor from Philips supports adaptive contrast management, dynamically adjusting the contrast ratio of the input signal to ensure razor-sharp image displays. Each scene is continuously analyzed by S223S5LSB and the images are adjusted accordingly frame by frame. This analysis and dynamic adjustment of contrast is designed to enhance color quality and provide better black levels when displaying dark scenes and shaded/dark image sequences.
HDR
The monitor supports all HDR modes listed here:
screen design
Philips Specifies the following dimensions for the monitor S223S5LSB without stand/feet: 31.6 cm x 50.3 cm x 5 cm (HxWxD)
The size of the monitor (stand included) is 37.6 x 50.3 x 21.3 cm (HxWxD). The device weighs 2.61 kg with the stand in place. According to Philips , you can expect a weight of about 2.35 kg without the stand. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting.
Rotate, tilt and swivel
The monitor from Philips cannot be rotated. The monitor cannot be swiveled. This feature could be retrofitted with a third-party stand. It is possible to adjust the tilt angle of the monitor S223S5LSB according to personal preference to ensure ergonomic and comfortable viewing. The angle of inclination to the rear is 20. The monitor can be tilted forward by 5 degree.
Ports
The monitor can be connected via 1 VGA ports.
camera
This monitor does not have a camera.
Loudspeaker
Features
WiFi / Bluetooth
Power consumption
The average consumption was given by Philips as 15.64 w. In standby mode, the device consumes approximately 0.5 w. When switched off, on the other hand, the monitor consumes only 0.5 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
The maximum height at which the monitor may be operated, according to the manufacturer's specifications, is 3.658 km. The maximum permissible ambient temperature is 40 °C during operation. Below a temperature of 0 °C , the monitor from Philips should again not be used. The humidity must not exceed 80 percent. At least, however, 20 percent humidity. The monitor may be stored at a maximum humidity of 80 percent. The minimum humidity during storage should not fall below 20 percent. The maximum storage temperature should be according to Philips 60 °C. Minimal were given by Philips -20 °C. According to the manufacturer, the monitor may be stored at a maximum height of 12.192 km.
Packaging
Additional information