Within this article we will take a closer look at the technical specifications of the 246E7QDAB monitor from Philips. For this we will talk about all possible categories that could be relevant. To start with, we will look at the display, talk about the design and in the next section we will go into the features of the monitor. Other features such as power consumption, connectors and certifications will follow later in the text.
Display
The display is sized at 23 inches ( 59.9 cm on the diagonal). While classic CRT monitors were built with a screen ratio of 4:3, this monitor has a ratio of 1.778 : 1 (width to height). Around 87.5 % of the front surface of the monitor consists of the display, while the rest is made up of screen edges that cannot display images. If you want to place several monitors next to each other, it is advisable to prefer those with narrow edges. The display is a IPS panel. The panel has a resolution of 1920 x 1080 px. The pixel density is 93 ppi. The pixel pitch is 0.272 mm. The continuous possible brightness specified by the manufacturer Philips is 250 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. Philips promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the 246E7QDAB 30 khz to 83 khz. Vertically, however, the image renews at a minimum rate of 56 hz up to 76 hz. The minimum response time of the monitor is ms. The average response time of the monitor is about ms. The display panel is Anti-glare/Matte.
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. According to the manufacturer, the coverage of the NTSC 1953 color space is 101 %.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from Philips has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 20000000 : 1 of dynamic contrast ratio for the monitor 246E7QDAB cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio. The monitor from Philips supports adaptive contrast management, dynamically adjusting the contrast ratio of the input signal to ensure razor-sharp image displays. Each scene is continuously analyzed by 246E7QDAB and the images are adjusted accordingly frame by frame. This analysis and dynamic adjustment of contrast is designed to enhance color quality and provide better black levels when displaying dark scenes and shaded/dark image sequences.
HDR
The monitor supports all HDR modes listed here:
screen design
For the installation of the monitor, a space requirement of approximately 32.4 cm in height, 53.9 cm in width and 4.5 cm in depth is to be assumed.
The size of the 246E7QDAB on the desk is likely to be particularly relevant for most users. Philips specifies a space requirement of 41.9 x 53.9 x 17.9 cm (HxWxD) with the included stand. As for the weight, Philips states a total weight of 3.18 kg with stand. A wall mount should be designed for at least 2.61 kg to hold the 246E7QDAB neatly and securely. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting.
Rotate, tilt and swivel
The monitor from Philips cannot be rotated. The monitor cannot be swiveled. This feature could be retrofitted with a third-party stand. The monitor 246E7QDAB can be tilted. The angle of inclination to the rear is 20. The monitor can be tilted forward by 5 degree.
Ports
The monitor can be connected via 1 VGA ports.
camera
This monitor does not have a camera.
Loudspeaker
The monitor from Philips has integrated speakers, for playing sounds, music or speech. The sound is emitted via 2 speakers, which are integrated into the device. Each of the built-in speakers has a contingent of 3 w power.
Features
- Flicker Free: Philips 's Flicker Free technology minimizes distracting screen flicker, allowing you to work and/or play longer without restrictions.
WiFi / Bluetooth
Power consumption
On average, the monitor consumes approximately 27 w. The maximum power consumption (peak) specified for this monitor is 35.64 w. In standby mode, the device consumes approximately 0.5 w. When switched off, on the other hand, the monitor consumes only 0.3 w. In ECO mode, the monitor consumes 14.47 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
The maximum height at which the monitor may be operated, according to the manufacturer's specifications, is 3.658 km. For temperature, the maximum permissible ambient temperature is 40 °C. Below a temperature of 0 °C , the monitor from Philips should again not be used. The humidity must not exceed 80 percent. At least, however, 20 percent humidity. The monitor may be stored at a maximum humidity of 80 percent. The minimum humidity during storage should not fall below 20 percent. The maximum storage temperature should be according to Philips 60 °C. Minimal were given by Philips -20 °C. According to the manufacturer, the monitor may be stored at a maximum height of 12.192 km.
Packaging
Additional information