Display, power consumption, dimensions, technologies used, connections, certifications, comfort features. All these keywords can be relevant for a purchase decision, but an exact comparison is often difficult. For this reason, we will summarize as many of the mentioned specifications as possible in an understandable form in the course of this article. Let's start with the most important component of the 328E9FJSB from Philips.
Display
Any multimedia content can be displayed on 31 inches ( 80.1 cm on the diagonal). Let's keep it short and sweet. The monitor has an aspect ratio of 1.778 : 1. Besides the aspect ratios and the specified screen diagonal, the ratio between the monitor surface and the actual display is probably also relevant for some enthusiasts. This is the general ratio of non-display to display. In other words, 90.4 % of the monitor's front area consists of the display. The remaining percent consists of screen edges and cannot display an image. If you want to place several monitors next to each other, you should make sure that the edges are as small as possible. The display is a VA panel. The panel has a resolution of 2560 x 1440 px. The pixel density is 93 ppi. The pixel pitch is 0.273 mm. The continuous possible brightness specified by the manufacturer Philips is 250 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. Philips promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the 328E9FJSB 70 khz to 115 khz. Vertically, however, the image renews at a minimum rate of 48 hz up to 76 hz. The frame rate in the analogue range is vertical at the 328E9FJSB 50 hz to 76 hz. The minimum response time of the monitor is ms. The display panel is Anti-glare/Matte (3H).
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. According to the manufacturer, the coverage of the NTSC 1953 color space is 102 %. According to the manufacturer, the coverage of the SRGB color space is 122 %.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from Philips has a static contrast ratio of 3000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 20000000 : 1 of dynamic contrast ratio for the monitor 328E9FJSB cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio. The monitor from Philips supports adaptive contrast management, dynamically adjusting the contrast ratio of the input signal to ensure razor-sharp image displays. Each scene is continuously analyzed by 328E9FJSB and the images are adjusted accordingly frame by frame. This analysis and dynamic adjustment of contrast is designed to enhance color quality and provide better black levels when displaying dark scenes and shaded/dark image sequences.
HDR
The monitor supports all HDR modes listed here:
screen design
The monitor has a width of 71.3 cm without its attached stand/stand. The height is dimensioned at about 42.5 cm , while the for the depth of the monitor should be kept free at about 5.2 cm.
The size of the 328E9FJSB on the desk is likely to be particularly relevant for most users. Philips specifies a space requirement of 52.5 x 71.3 x 23.6 cm (HxWxD) with the included stand. The device weighs 6.78 kg with the stand in place. The monitor 328E9FJSB without the stand weighs 6.4 kg. This weight reduction should be taken into account for wall or arm mounting, since monitor arms have a maximum load capacity. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting.
Curved
The 328E9FJSB is a curved monitor with a curvature of 1.8 m
Rotate, tilt and swivel
The monitor from Philips cannot be rotated. The monitor cannot be swiveled. This feature could be retrofitted with a third-party stand. The monitor 328E9FJSB offers the option of adjusting the tilt as required to create an ergonomic working environment and reduce visual fatigue. The angle of inclination to the rear is 20. The monitor can be tilted forward by 5 degree.
Ports
The monitor can be connected via 1 VGA ports.
camera
This monitor does not have a camera.
Loudspeaker
Features
- Flicker Free: Philips 's Flicker Free technology minimizes distracting screen flicker, allowing you to work and/or play longer without restrictions.
- AMD FreeSync: By dynamically synchronizing the refresh rate of the 328E9FJSB with the frame rate, AMD FreeSync minimizes judder and ensures smooth and enjoyable gameplay.
Anyone who works a lot on the computer spends many hours a day in front of the screen. Excessive screen work can damage the eyes. This effect can be particularly pronounced during the darker hours and in the winter months. Many monitor manufacturers have now reacted and offer technologies and settings to reduce the blue component, which is primarily controversial. Depending on the manufacturer, these can be called "Low Blue Light", "Low Blue Light Technology", "SoftBlue" or even "Eye Saver Mode" and function differently. However, it is only important that Philips offers a technology to reduce the blue content in its monitor 328E9FJSB.
WiFi / Bluetooth
Power consumption
The average consumption figure for 328E9FJSB is 59.38 w. The maximum power consumption (peak) specified for this monitor is 71.3 w. In standby mode, the device consumes approximately 0.5 w. When switched off, on the other hand, the monitor consumes only 0.3 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
The maximum height at which the monitor may be operated, according to the manufacturer's specifications, is 3.658 km. The maximum permissible ambient temperature is 40 °C during operation. Below a temperature of 0 °C , the monitor from Philips should again not be used. The humidity must not exceed 80 percent. At least, however, 20 percent humidity. The maximum storage temperature should be according to Philips 60 °C. Minimal were given by Philips -20 °C. According to the manufacturer, the monitor may be stored at a maximum height of 12.192 km.
Packaging
Additional information