Today we will look at the monitor 392M7C from Philips from the year 2019. Within this article, we will first take a closer look at the most important feature of a monitor -the display-, then the design, and in the next section we will go into the features of the monitor. Of course, power consumption, certifications, connectivity and other important details will also be considered.
Display
Texts, videos and/or other applications can be displayed on the 38 inches ( 97.9 cm on the diagonal) of the monitor. Let's keep it short and sweet. The monitor has an aspect ratio of 1.778 : 1. Around 91.7 % of the front surface of the monitor consists of the display, while the rest is made up of screen edges that cannot display images. If you want to place several monitors next to each other, it is advisable to prefer those with narrow edges. The display is a VA panel. The panel has a resolution of 1920 x 1080 px. The pixel density is 57 ppi. The pixel pitch is 0.445 mm. The continuous possible brightness specified by the manufacturer Philips is 250 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. Philips promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the 392M7C 135 khz to 160 khz. Vertically, however, the image renews at a minimum rate of 120 hz up to 146 hz.
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. According to the manufacturer, the coverage of the NTSC 1953 color space is 94 %. According to the manufacturer, the coverage of the SRGB color space is 105 %.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from Philips has a static contrast ratio of 5000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 80000000 : 1 of dynamic contrast ratio for the monitor 392M7C cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.
HDR
The monitor supports all HDR modes listed here:
screen design
The following dimensions must be planned for a free-standing stand without attached feet/stand: 51 cm x 87.7 cm x 7.5 cm (HxWxD)
If you want to place the monitor described here on the desk without a wall mount, you should allow for 69.7 x 87.7 x 24.5 cm (HxWxD) of space. The device weighs in total (i.e. also measured with the stand) 8.76 kg. The monitor 392M7C without the stand weighs 7.94 kg. This weight reduction should be taken into account for wall or arm mounting, since monitor arms have a maximum load capacity. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting.
Curved
The 392M7C is a curved monitor with a curvature of 3 m
Rotate, tilt and swivel
The monitor from Philips cannot be rotated. The monitor cannot be swiveled. This feature could be retrofitted with a third-party stand. The tilt of the monitor 392M7C can be individually adjusted to optimize the viewing angle and increase comfort during use. The angle of inclination to the rear is 10. The monitor can be tilted forward by 5 degree.
Ports
The monitor can be connected via 1 VGA ports.
camera
This monitor does not have a camera.
Loudspeaker
Features
- Flicker Free: Philips 's Flicker Free technology minimizes distracting screen flicker, allowing you to work and/or play longer without restrictions.
Anyone who works a lot on the computer spends many hours a day in front of the screen. Excessive screen work can damage the eyes. This effect can be particularly pronounced during the darker hours and in the winter months. Many monitor manufacturers have now reacted and offer technologies and settings to reduce the blue component, which is primarily controversial. Depending on the manufacturer, these can be called "Low Blue Light", "Low Blue Light Technology", "SoftBlue" or even "Eye Saver Mode" and function differently. However, it is only important that Philips offers a technology to reduce the blue content in its monitor 392M7C. The Adaptive Sync feature of the 392M7C dynamically varies the monitor's refresh rate and responds to the game's required frame rates.
WiFi / Bluetooth
Power consumption
The average consumption was given by Philips as 46.4 w. The maximum power consumption (peak) specified for this monitor is 59.2 w. In standby mode, the device consumes approximately 0.5 w. When switched off, on the other hand, the monitor consumes only 0.3 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
The maximum height at which the monitor may be operated, according to the manufacturer's specifications, is 3.658 km. During operation, the ambient temperature must not exceed 40 °C , to ensure full functionality. Below a temperature of 0 °C , the monitor from Philips should again not be used. The humidity must not exceed 80 percent. At least, however, 20 percent humidity. The monitor may be stored at a maximum humidity of 90 percent. The minimum humidity during storage should not fall below 10 percent. The maximum storage temperature should be according to Philips 60 °C. Minimal were given by Philips -20 °C. According to the manufacturer, the monitor may be stored at a maximum height of 12.192 km.
Packaging
Additional information