Within this article we will take a closer look at the technical specifications of the MultiSync EA223WM monitor from NEC. For this we will talk about all possible categories that could be relevant. To start with, we will look at the display, talk about the design and in the next section we will go into the features of the monitor. Other features such as power consumption, connectors and certifications will follow later in the text.
Display
Let's start with the most important component of a monitor, the display. Depending on the aspect ratio of height and width, monitors can be rather wide or square, for example. Besides the pure physical dimensions, the resolution of the display and thus the quality of the display is also decisive here. For easy comparability, however, screen sizes are usually given in inches. This unit of measurement simply compares the diagonal length from the lower left to the upper right corner of the display and is thus universally applicable. This device has a screen diagonal of 22 inches ( 55.8 cm on the diagonal). As already mentioned or known, monitors have a certain number of pixels in height and width. In most cases, this is not a 1:1 ratio, which is also the case with the monitor from NEC. This monitor has an aspect ratio of 1.6 : 1. This means that every 1.6 pixels in width 1 pixels in height are added. Approximately 84.5 % of the front surface of the monitor is taken up by the display, while the remaining part is screen edges that do not allow the image to be displayed. If you want to place several monitors next to each other, it is advisable to choose models with narrow edges. The display is a TN panel. The panel has a resolution of 1680 x 1050 px. The pixel density is 90 ppi. The pixel pitch is 0.282 mm. The continuous possible brightness specified by the manufacturer NEC is 250 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 170 ° (horizontal) viewing angle. NEC promises stable color reproduction moreover within a 160 ° vertical angle. The refresh rate is horizontally seen at the MultiSync EA223WM 31.5 khz to 82.3 khz. Vertically, however, the image renews at a minimum rate of 56 hz up to 75 hz. The minimum response time of the monitor is ms. The display panel is Anti-glare/Matte.
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. According to the manufacturer, the coverage of the NTSC 1953 color space is 72 %.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from NEC has a static contrast ratio of 1000 : 1 , according to the manufacturer.
HDR
The monitor supports all HDR modes listed here:
screen design
For a possible wall mounting or comparison to the currently owned monitor at the beginning, the dimensions of the monitor without stand/feet: 32.9 cm x 50.3 cm x 6 cm (HxWxD)
The size of the MultiSync EA223WM on the desk is likely to be particularly relevant for most users. NEC specifies a space requirement of 38.4 x 50.3 x 21.8 cm (HxWxD) with the included stand. If you want to place the monitor on a table or even transport it, you should expect a weight of 5.6 kg with the stand screwed in. Without stand, the monitor weighs 3.3 kg. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting. A height-adjustable stand ensures an improved ergonomic posture during use. The monitor can be moved to a maximum height of 13 cm. This value is always measured from the bottom edge of the screen.
Rotate, tilt and swivel
The monitor from NEC has a pivot function and can thus be rotated using the included stand. A rotation to the left is possible with up to 0 degree. To the right, the monitor can be rotated by 90 degree. The MultiSync EA223WM can be swiveled when mounted on the included stand. Pivoting to the left is possible up to 170 degree. Pivoting to the right is possible up to 170 degree. Thanks to the tilt function of the MultiSync EA223WM monitor, the screen position can be flexibly adjusted to minimize dazzling light sources and ensure optimum visibility. The angle of inclination to the rear is 30. The monitor can be tilted forward by 5 degree.
Ports
The monitor can be connected via 1 VGA ports.
camera
This monitor does not have a camera.
Loudspeaker
The monitor from NEC has integrated speakers, for playing sounds, music or speech. The sound is emitted via 2 speakers, which are integrated into the device. Each of the built-in speakers has a contingent of 1 w power.
Features
- The display/monitor supports Frame Rate Compensation.
WiFi / Bluetooth
Power consumption
The average consumption figure for MultiSync EA223WM is 19 w. The maximum power consumption (peak) specified for this monitor is 25 w. In standby mode, the device consumes approximately 0.5 w. When switched off, on the other hand, the monitor consumes only 0.3 w. MultiSync EA223WM supports a static ECO mode, which for example lowers the refresh rate, reduces brightness and disables AI functions to save energy. In ECO mode, the monitor consumes 12 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
The maximum height at which the monitor may be operated, according to the manufacturer's specifications, is 2 km. For temperature, the maximum permissible ambient temperature is 35 °C. Below a temperature of 5 °C , the monitor from NEC should again not be used. The humidity must not exceed 80 percent. At least, however, 20 percent humidity. The monitor may be stored at a maximum humidity of 85 percent. The minimum humidity during storage should not fall below 10 percent. The maximum storage temperature should be according to NEC 60 °C. Minimal were given by NEC -10 °c. According to the manufacturer, the monitor may be stored at a maximum height of 12.192 km.
Packaging
Additional information