Display, power consumption, dimensions, technologies used, connections, certifications, comfort features. All these keywords can be relevant for a purchase decision, but an exact comparison is often difficult. For this reason, we will summarize as many of the mentioned specifications as possible in an understandable form in the course of this article. Let's start with the most important component of the MultiSync EA234WMi from NEC.
Display
According to the manufacturer, the display measures 23 inches ( 58.4 cm on the diagonal). As already mentioned or known, monitors have a certain number of pixels in height and width. In most cases, this is not a 1:1 ratio, which is also the case with the monitor from NEC. This monitor has an aspect ratio of 1.778 : 1. This means that every 1.778 pixels in width 1 pixels in height are added. Approximately 83.4 % of the front surface of the monitor is covered by the display, while the remaining area consists of screen edges that do not allow any image output. If you want to set up several monitors next to each other, it is advisable to prefer models with the narrowest possible edges. The display is a IPS panel. The panel has a resolution of 1920 x 1080 px. The pixel density is 95 ppi. The pixel pitch is 0.265 mm. The continuous possible brightness specified by the manufacturer NEC is 250 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. NEC promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the MultiSync EA234WMi 31.5 khz to 83 khz. Vertically, however, the image renews at a minimum rate of 56 hz up to 75 hz. The analog refresh rate of this monitor is 31.5 khz to 83 khz. The minimum response time of the monitor is ms. The display panel is Anti-glare/Matte (3H).
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. The coverage of the Adobe RGB 1998 color space is 62 % according to the manufacturer. According to the manufacturer, the coverage of the SRGB color space is 85 %.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from NEC has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 25000 : 1 of dynamic contrast ratio for the monitor MultiSync EA234WMi cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.
HDR
The monitor supports all HDR modes listed here:
screen design
For a possible wall mounting or comparison to the currently owned monitor at the beginning, the dimensions of the monitor without stand/feet: 32.1 cm x 54.3 cm x 6 cm (HxWxD)
If you want to place the monitor described here on the desk without a wall mount, you should allow for 38 x 54.3 x 21.8 cm (HxWxD) of space. The device weighs in total (i.e. also measured with the stand) 6.4 kg. A wall mount should be designed for at least 4 kg to hold the MultiSync EA234WMi neatly and securely. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting. A height-adjustable stand ensures an improved ergonomic posture during use. The monitor can be moved to a maximum height of 13 cm. This value is always measured from the bottom edge of the screen.
Rotate, tilt and swivel
The monitor from NEC has a pivot function and can thus be rotated using the included stand. A rotation to the left is possible with up to 0 degree. To the right, the monitor can be rotated by 90 degree. The MultiSync EA234WMi can be swiveled when mounted on the included stand. Pivoting to the left is possible up to 170 degree. Pivoting to the right is possible up to 170 degree. It is possible to adjust the tilt angle of the monitor MultiSync EA234WMi according to personal preference to ensure ergonomic and comfortable viewing. The angle of inclination to the rear is 30. The monitor can be tilted forward by 5 degree.
Ports
The monitor can be connected via 1 VGA ports.
camera
This monitor does not have a camera.
Loudspeaker
The monitor from NEC has integrated speakers, for playing sounds, music or speech. The sound is emitted via 2 speakers, which are integrated into the device. Each of the built-in speakers has a contingent of 1 w power.
Features
- The display/monitor supports Frame Rate Compensation.
WiFi / Bluetooth
Power consumption
The average consumption figure for MultiSync EA234WMi is 22 w. The maximum power consumption (peak) specified for this monitor is 27 w. When switched off, on the other hand, the monitor consumes only 0.47 w. MultiSync EA234WMi supports a static ECO mode, which for example lowers the refresh rate, reduces brightness and disables AI functions to save energy. In ECO mode, the monitor consumes 16 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. There are 0.8 amps specified. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
The monitor has a built-in ambient light sensor, which can be used, for example, to dynamically adjust the brightness of the monitor to the ambient conditions. The maximum height at which the monitor may be operated, according to the manufacturer's specifications, is 2 km. The maximum permissible ambient temperature is 35 °C during operation. Below a temperature of 5 °C , the monitor from NEC should again not be used. The humidity must not exceed 80 percent. At least, however, 20 percent humidity. The monitor may be stored at a maximum humidity of 85 percent. The minimum humidity during storage should not fall below 10 percent. The maximum storage temperature should be according to NEC 60 °C. Minimal were given by NEC -10 °c. According to the manufacturer, the monitor may be stored at a maximum height of 12.192 km.
Packaging
Additional information