Menu

NEC MultiSync PA302W

Product image for MultiSync PA302W

Today we will look at the monitor MultiSync PA302W from NEC from the year 2013. Within this article, we will first take a closer look at the most important feature of a monitor -the display-, then the design, and in the next section we will go into the features of the monitor. Of course, power consumption, certifications, connectivity and other important details will also be considered.

Display

29 inches ( 75.6 cm on the diagonal) offer sufficient space for texts in any office applications, for example. As already mentioned or known, monitors have a certain number of pixels in height and width. In most cases, this is not a 1:1 ratio, which is also the case with the monitor from NEC. This monitor has an aspect ratio of 1.6 : 1. This means that every 1.6 pixels in width 1 pixels in height are added. In addition to the aspect ratios and the specified screen diagonal, the ratio between the monitor surface and the actual display could also be important for some enthusiasts. This ratio describes the general relationship between the non-display area and the display. In other words, approximately 83.6 % of the front surface of the monitor consists of the display, while the remaining percent consists of screen edges and does not enable image reproduction. When setting up several monitors next to each other, it is advisable to prefer models with the narrowest possible edges. The display is a AH panel. The panel has a resolution of 2560 x 1600 px. The pixel density is 101 ppi. The pixel pitch is 0.251 mm. The continuous possible brightness specified by the manufacturer NEC is 340 nt. The panel is illuminated by GB-r LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. NEC promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the MultiSync PA302W 31.5 khz to 98.7 khz. Vertically, however, the image renews at a minimum rate of 50 hz up to 85 hz. The minimum response time of the monitor is ms. The maximum response time of the monitor is ms. The average response time of the monitor is about ms. The display panel is Anti-glare/Matte (3H).

Color space

The panel has a bit depth of 10 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. The coverage of the Adobe RGB 1998 color space is 99 % according to the manufacturer. According to the manufacturer, the coverage of the NTSC 1953 color space is 94 %. According to the manufacturer, the coverage of the SRGB color space is 146 %.

Contrast ratio

Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from NEC has a static contrast ratio of 1000 : 1 , according to the manufacturer.

HDR

The monitor supports all HDR modes listed here:

screen design

The monitor has a width of 68.8 cm without its attached stand/stand. The height is dimensioned at about 44.6 cm , while the for the depth of the monitor should be kept free at about 8.2 cm.
The size of the monitor (stand included) is 46.6 x 68.8 x 30.1 cm (HxWxD). The device weighs 17 kg with the stand in place. A wall mount should be designed for at least 10.7 kg to hold the MultiSync PA302W neatly and securely. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting. A height-adjustable stand ensures an improved ergonomic posture during use. The monitor can be moved to a maximum height of 15 cm. This value is always measured from the bottom edge of the screen.

Rotate, tilt and swivel

The monitor from NEC has a pivot function and can thus be rotated using the included stand. A rotation to the left is possible with up to 0 degree. To the right, the monitor can be rotated by 90 degree. The MultiSync PA302W can be swiveled when mounted on the included stand. Pivoting to the left is possible up to 45 degree. Pivoting to the right is possible up to 45 degree. Thanks to the tilt function of the MultiSync PA302W monitor, the screen position can be flexibly adjusted to minimize dazzling light sources and ensure optimum visibility. The angle of inclination to the rear is 30. The monitor can be tilted forward by 5 degree.

Ports

camera

This monitor does not have a camera.

Loudspeaker

Features

  • Picture by Picture mode
  • Picture in Picture mode

Panel manufacturer

Many manufacturers of monitors and TVs fall back on third-party manufacturers, such as Samsung or LG, when choosing the actual display (panel). Thus, many of the monitors have the same panel and, conversely, differ only in their design, additional functionalities, the software used and, of course, the price. Two monitors from NEC or another manufacturer with an identical panel do not necessarily have to have the same picture quality, but it is usually a first indicator for a purchase decision. The panel used here is originally from LG Display and has the model number LM300WQ6.

WiFi / Bluetooth

Power consumption

The average consumption was given by NEC as 52 w. The maximum power consumption (peak) specified for this monitor is 96 w. In standby mode, the device consumes approximately 1.4 w. When switched off, on the other hand, the monitor consumes only 0.2 w. In ECO mode, the monitor consumes 32 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. There are 1.1 amps specified. The power grid has to supply a frequency of 50 hz to 60 hz.

Environment

The monitor has a built-in ambient light sensor, which can be used, for example, to dynamically adjust the brightness of the monitor to the ambient conditions. The maximum height at which the monitor may be operated, according to the manufacturer's specifications, is 5 km. During operation, the ambient temperature must not exceed 35 °C , to ensure full functionality. Below a temperature of 5 °C , the monitor from NEC should again not be used. The humidity must not exceed 80 percent. At least, however, 20 percent humidity. The monitor may be stored at a maximum humidity of 85 percent. The minimum humidity during storage should not fall below 10 percent. The maximum storage temperature should be according to NEC 60 °C. Minimal were given by NEC -20 °C. According to the manufacturer, the monitor may be stored at a maximum height of 12.192 km.

Packaging

Additional information

LUT calibration depth (bits)
14 bits
Minimum input lag
34 ms
Series
MultiSync
Has a Vesa Mount (100x100)
mount.vesa.100x200