Menu

NEC MultiSync EA275UHD

Product image for MultiSync EA275UHD

Within this article we will take a closer look at the technical specifications of the MultiSync EA275UHD monitor from NEC. For this we will talk about all possible categories that could be relevant. To start with, we will look at the display, talk about the design and in the next section we will go into the features of the monitor. Other features such as power consumption, connectors and certifications will follow later in the text.

Display

According to the manufacturer, the display measures 27 inches ( 68.4 cm on the diagonal). While classic CRT monitors were built with a screen ratio of 4:3, this monitor has a ratio of 1.778 : 1 (width to height). Approximately 82.7 % of the front surface of the monitor is covered by the display, while the remaining area consists of screen edges that do not allow any image output. If you want to set up several monitors next to each other, it is advisable to prefer models with the narrowest possible edges. The display is a AH panel. The panel has a resolution of 3840 x 2160 px. The pixel density is 163 ppi. The pixel pitch is 0.155 mm. The continuous possible brightness specified by the manufacturer NEC is 350 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. NEC promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the MultiSync EA275UHD 31.5 khz to 135 khz. Vertically, however, the image renews at a minimum rate of 30 hz up to 75 hz. The minimum response time of the monitor is ms. The average response time of the monitor is about ms. The display panel is Anti-glare/Matte (3H).

Color space

The panel has a bit depth of 10 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. The coverage of the Adobe RGB 1998 color space is 81 % according to the manufacturer. According to the manufacturer, the coverage of the NTSC 1953 color space is 78 %. According to the manufacturer, the coverage of the SRGB color space is 110 %.

Contrast ratio

Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from NEC has a static contrast ratio of 1000 : 1 , according to the manufacturer.

HDR

The monitor supports all HDR modes listed here:

screen design

Without the stand, the monitor comes with a width of 63.9 cm , a height of 37.7 cm and about 6.6 cm.
If you want to place the monitor described here on the desk without a wall mount, you should allow for 41.7 x 63.9 x 23 cm (HxWxD) of space. As for the weight, NEC states a total weight of 9.1 kg with stand. According to NEC , you can expect a weight of about 6.2 kg without the stand. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting. A height-adjustable stand ensures an improved ergonomic posture during use. The monitor can be moved to a maximum height of 13 cm. This value is always measured from the bottom edge of the screen.

Rotate, tilt and swivel

The monitor from NEC has a pivot function and can thus be rotated using the included stand. A rotation to the left is possible with up to 0 degree. To the right, the monitor can be rotated by 90 degree. The MultiSync EA275UHD can be swiveled when mounted on the included stand. Pivoting to the left is possible up to 170 degree. Pivoting to the right is possible up to 170 degree. Thanks to the tilt function of the MultiSync EA275UHD monitor, the screen position can be flexibly adjusted to minimize dazzling light sources and ensure optimum visibility. The angle of inclination to the rear is 30. The monitor can be tilted forward by 5 degree.

Ports

camera

This monitor does not have a camera.

Loudspeaker

The monitor from NEC has integrated speakers, for playing sounds, music or speech. The sound is emitted via 2 speakers, which are integrated into the device. Each of the built-in speakers has a contingent of 1 w power.

Features

  • Picture by Picture mode
  • The display/monitor supports Frame Rate Compensation.

The monitor MultiSync EA275UHD supports upscaling of the input signal up to 4k resolution.

Panel manufacturer

Many manufacturers of monitors and TVs fall back on third-party manufacturers, such as Samsung or LG, when choosing the actual display (panel). Thus, many of the monitors have the same panel and, conversely, differ only in their design, additional functionalities, the software used and, of course, the price. Two monitors from NEC or another manufacturer with an identical panel do not necessarily have to have the same picture quality, but it is usually a first indicator for a purchase decision. The panel used here is originally from LG Display and has the model number LM270WR2-SPA1.

WiFi / Bluetooth

Power consumption

The average consumption figure for MultiSync EA275UHD is 34 w. The maximum power consumption (peak) specified for this monitor is 49 w. When switched off, on the other hand, the monitor consumes only 0.37 w. MultiSync EA275UHD supports a static ECO mode, which for example lowers the refresh rate, reduces brightness and disables AI functions to save energy. In ECO mode, the monitor consumes 28 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. There are 1 amps specified. The power grid has to supply a frequency of 50 hz to 60 hz.

Environment

The monitor has a built-in ambient light sensor, which can be used, for example, to dynamically adjust the brightness of the monitor to the ambient conditions. The maximum height at which the monitor may be operated, according to the manufacturer's specifications, is 5 km. During operation, the ambient temperature must not exceed 35 °C , to ensure full functionality. Below a temperature of 5 °C , the monitor from NEC should again not be used. The humidity must not exceed 80 percent. At least, however, 20 percent humidity. The monitor may be stored at a maximum humidity of 85 percent. The minimum humidity during storage should not fall below 10 percent. The maximum storage temperature should be according to NEC 60 °C. Minimal were given by NEC -10 °c. According to the manufacturer, the monitor may be stored at a maximum height of 12.192 km.

Packaging

Additional information

Minimum input lag
70 ms
Series
MultiSync
Has a Vesa Mount (100x100)
Has at least one 3.5mm audio input jack?
Has at least one 3.5mm audio output jack?
Has the monitor USB 3 ports?
Number of 3.5mm audio input jacks
1
Number of 3.5mm audio output jacks
1
Number of USB 3 ports
1
Released in year
2015 y
software.ddc.2b

We are missing something - Can you help?