Menu

LG 19MB35D

Product image for 19MB35D

Display, power consumption, dimensions, technologies used, connections, certifications, comfort features. All these keywords can be relevant for a purchase decision, but an exact comparison is often difficult. For this reason, we will summarize as many of the mentioned specifications as possible in an understandable form in the course of this article. Let's start with the most important component of the 19MB35D from LG.

Display

Let's start with the size of the display. It is 19 inches ( 48 cm on the diagonal) large and should thus offer enough space for all contents according to LG. Let's keep it short and sweet. The monitor has an aspect ratio of 1.25 : 1. Approximately 81.3 % of the front surface of the monitor is covered by the display, while the remaining area consists of screen edges that do not allow any image output. If you want to set up several monitors next to each other, it is advisable to prefer models with the narrowest possible edges. The display is a IPS panel. The panel has a resolution of 1280 x 1024 px. The pixel density is 86 ppi. The pixel pitch is 0.293 mm. The continuous possible brightness specified by the manufacturer LG is 250 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. LG promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the 19MB35D 30 khz to 83 khz. Vertically, however, the image renews at a minimum rate of 56 hz up to 75 hz. The minimum response time of the monitor is ms. The display panel is Anti-glare/Matte (3H).

Color space

The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. According to the manufacturer, the coverage of the NTSC 1953 color space is 72 %.

Contrast ratio

Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from LG has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 5000000 : 1 of dynamic contrast ratio for the monitor 19MB35D cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.

HDR

The monitor supports all HDR modes listed here:

screen design

The monitor has a width of 40.9 cm without its attached stand/stand. The height is dimensioned at about 33.8 cm , while the for the depth of the monitor should be kept free at about 5.8 cm.
The size of the 19MB35D on the desk is likely to be particularly relevant for most users. LG specifies a space requirement of 42.5 x 40.9 x 21 cm (HxWxD) with the included stand. If you want to place the monitor on a table or even transport it, you should expect a weight of 2.8 kg with the stand screwed in. The monitor 19MB35D without the stand weighs 2.7 kg. This weight reduction should be taken into account for wall or arm mounting, since monitor arms have a maximum load capacity. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting.

Rotate, tilt and swivel

The monitor from LG cannot be rotated. The monitor cannot be swiveled. This feature could be retrofitted with a third-party stand. The monitor 19MB35D can be tilted. The angle of inclination to the rear is 20. The monitor can be tilted forward by 5 degree.

Ports

The monitor can be connected via 1 VGA ports.

camera

This monitor does not have a camera.

Loudspeaker

Features

  • Flicker Free: LG 's Flicker Free technology minimizes distracting screen flicker, allowing you to work and/or play longer without restrictions.
  • The display/monitor supports Frame Rate Compensation.

WiFi / Bluetooth

Power consumption

On average, the monitor consumes approximately 13.8 w. The maximum power consumption (peak) specified for this monitor is 17.9 w. In standby mode, the device consumes approximately 0.3 w. When switched off, on the other hand, the monitor consumes only 0.3 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. There are 0.8 amps specified. The power grid has to supply a frequency of 50 hz to 60 hz.

Environment

For temperature, the maximum permissible ambient temperature is 35 °C. Below a temperature of 10 °C , the monitor from LG should again not be used. The humidity must not exceed 80 percent. At least, however, 10 percent humidity. The monitor may be stored at a maximum humidity of 90 percent. The minimum humidity during storage should not fall below 5 percent. The maximum storage temperature should be according to LG 60 °C. Minimal were given by LG -20 °C.

Packaging

Additional information

VESA mount (75x75)
Released in year
2014 y