Within this article we will take a closer look at the technical specifications of the 32MA68HY monitor from LG. For this we will talk about all possible categories that could be relevant. To start with, we will look at the display, talk about the design and in the next section we will go into the features of the monitor. Other features such as power consumption, connectors and certifications will follow later in the text.
Display
Let's start with the most important component of a monitor, the display. Depending on the aspect ratio of height and width, monitors can be rather wide or square, for example. Besides the pure physical dimensions, the resolution of the display and thus the quality of the display is also decisive here. For easy comparability, however, screen sizes are usually given in inches. This unit of measurement simply compares the diagonal length from the lower left to the upper right corner of the display and is thus universally applicable. This device has a screen diagonal of 31 inches ( 80.1 cm on the diagonal). As already known, two monitors with different outer dimensions can have the same screen diagonal. In the case of the monitor 32MA68HY , we find an aspect ratio of 1.778 to 1. This means that for every 1 pixels in height, 1.778 pixels in width are added. For comparison: A classic CRT monitor had an aspect ratio of 4:3. In addition to the aspect ratios and the specified screen diagonal, some enthusiasts may also be interested in the ratio between the monitor area and the actual display. This refers to the general ratio between the non-display area and the display. In other words, approximately 87.7 % of the front surface of the monitor consists of the display, while the rest is made up of screen edges and cannot display an image. When arranging several monitors next to each other, it is advisable to choose models with the narrowest possible edges. The display is a IPS panel. The panel has a resolution of 1920 x 1080 px. The pixel density is 69 ppi. The pixel pitch is 0.364 mm. The continuous possible brightness specified by the manufacturer LG is 250 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. LG promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the 32MA68HY 30 khz to 83 khz. Vertically, however, the image renews at a minimum rate of 47 hz up to 63 hz. The minimum response time of the monitor is ms. The display panel is Anti-glare/Matte (3H).
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from LG has a static contrast ratio of 1000 : 1 , according to the manufacturer.
HDR
The monitor supports all HDR modes listed here:
screen design
The monitor has a width of 72.6 cm without its attached stand/stand. The height is dimensioned at about 43 cm , while the for the depth of the monitor should be kept free at about 9.4 cm.
If you want to place the monitor described here on the desk without a wall mount, you should allow for 49.1 x 72.6 x 20.4 cm (HxWxD) of space. The device weighs 6.5 kg with the stand in place. The monitor 32MA68HY without the stand weighs 6 kg. This weight reduction should be taken into account for wall or arm mounting, since monitor arms have a maximum load capacity. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting.
Rotate, tilt and swivel
The monitor from LG cannot be rotated. The monitor cannot be swiveled. This feature could be retrofitted with a third-party stand. The monitor 32MA68HY offers the option of adjusting the tilt as required to create an ergonomic working environment and reduce visual fatigue. The angle of inclination to the rear is 10. The monitor can be tilted forward by 5 degree.
Ports
The monitor can be connected via 1 VGA ports.
camera
This monitor does not have a camera.
Loudspeaker
Features
- Flicker Free: LG 's Flicker Free technology minimizes distracting screen flicker, allowing you to work and/or play longer without restrictions.
- Picture in Picture mode
WiFi / Bluetooth
Power consumption
On average, the monitor consumes approximately 27.7 w. The maximum power consumption (peak) specified for this monitor is 37.6 w. In standby mode, the device consumes approximately 0.3 w. When switched off, on the other hand, the monitor consumes only 0.3 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. There are 2 amps specified. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
For temperature, the maximum permissible ambient temperature is 40 °C. Below a temperature of 0 °C , the monitor from LG should again not be used. The humidity must not exceed 80 percent. At least, however, 10 percent humidity. The monitor may be stored at a maximum humidity of 85 percent. The minimum humidity during storage should not fall below 5 percent. The maximum storage temperature should be according to LG 60 °C. Minimal were given by LG -20 °C.
Packaging
Additional information