Within this article we will take a closer look at the technical specifications of the 29WL50S monitor from LG. For this we will talk about all possible categories that could be relevant. To start with, we will look at the display, talk about the design and in the next section we will go into the features of the monitor. Other features such as power consumption, connectors and certifications will follow later in the text.
Display
Let's start with the size of the actual display. This is given in inches and measures the screen diagonal of the display. The monitor 29WL50S has a display size of 29 inches ( 73 cm on the diagonal). It should be noted, however, that displays in this category can have different dimensions, since square monitors, for example, can have the same diagonal as a widescreen monitor. While classic CRT monitors were built with a screen ratio of 4:3, this monitor has a ratio of 2.37 : 1 (width to height). If you want to pay attention to special aesthetics or simply want to place several monitors next to each other, you should pay attention to the ratio between display and non-display. The 29WL50S is a monitor with a ratio of 86.1 % between usable and non-usable front surface. The display is a IPS panel. The panel has a resolution of 2560 x 1080 px. The pixel density is 96 ppi. The pixel pitch is 0.263 mm. The continuous possible brightness specified by the manufacturer LG is 250 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. LG promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the 29WL50S 30 khz to 90 khz. Vertically, however, the image renews at a minimum rate of 40 hz up to 75 hz. The minimum response time of the monitor is ms. The display panel is Anti-glare/Matte (3H).
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. According to the manufacturer, the coverage of the SRGB color space is 99 %.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from LG has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 5000000 : 1 of dynamic contrast ratio for the monitor 29WL50S cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.
HDR
The monitor supports all HDR modes listed here:
- HDR 10
screen design
For the installation of the monitor, a space requirement of approximately 31.7 cm in height, 69.8 cm in width and 7.6 cm in depth is to be assumed.
The size of the 29WL50S on the desk is likely to be particularly relevant for most users. LG specifies a space requirement of 41 x 69.8 x 20.9 cm (HxWxD) with the included stand. If you want to place the monitor on a table or even transport it, you should expect a weight of 5.2 kg with the stand screwed in. The monitor 29WL50S without the stand weighs 4.7 kg. This weight reduction should be taken into account for wall or arm mounting, since monitor arms have a maximum load capacity.
Rotate, tilt and swivel
The monitor from LG cannot be rotated. The monitor cannot be swiveled. This feature could be retrofitted with a third-party stand. Thanks to the tilt function of the 29WL50S monitor, the screen position can be flexibly adjusted to minimize dazzling light sources and ensure optimum visibility. The angle of inclination to the rear is 15. The monitor can be tilted forward by 5 degree.
Ports
camera
This monitor does not have a camera.
Loudspeaker
The monitor from LG has integrated speakers, for playing sounds, music or speech. The sound is emitted via 2 speakers, which are integrated into the device. Each of the built-in speakers has a contingent of 5 w power.
Features
- Flicker Free: LG 's Flicker Free technology minimizes distracting screen flicker, allowing you to work and/or play longer without restrictions.
- AMD FreeSync: By dynamically synchronizing the refresh rate of the 29WL50S with the frame rate, AMD FreeSync minimizes judder and ensures smooth and enjoyable gameplay.
- Picture in Picture mode
- The display/monitor supports Frame Rate Compensation.
The monitor from LG supports the reduction of artifacts within dark image areas, which are caused by compression of the played video files, for example. Depending on the manufacturer, this technology is called Black Boost, Dark Boost, Black Stabilizer, Black Equalizer or Black Enhancement.
WiFi / Bluetooth
Power consumption
The average consumption was given by LG as 21 w. In standby mode, the device consumes approximately 0.5 w. When switched off, on the other hand, the monitor consumes only 0.3 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. There are 2 amps specified. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
The maximum permissible ambient temperature is 40 °C during operation. Below a temperature of 0 °C , the monitor from LG should again not be used. The humidity must not exceed 80 percent. At least, however, 10 percent humidity. The monitor may be stored at a maximum humidity of 85 percent. The minimum humidity during storage should not fall below 5 percent. The maximum storage temperature should be according to LG 60 °C. Minimal were given by LG -20 °C.
Packaging
The monitor is packaged in a cardboard box measuring 41.3 x 82.2 x 15.9 cm (height x width x depth). The box together with the monitor weighs about 7.5 kg.
Additional information