Within this article we will take a closer look at the technical specifications of the ProLite XU2495WSU-B1 monitor from Iiyama. For this we will talk about all possible categories that could be relevant. To start with, we will look at the display, talk about the design and in the next section we will go into the features of the monitor. Other features such as power consumption, connectors and certifications will follow later in the text.
Display
Let's start with the most important component of a monitor, the display. Depending on the aspect ratio of height and width, monitors can be rather wide or square, for example. Besides the pure physical dimensions, the resolution of the display and thus the quality of the display is also decisive here. For easy comparability, however, screen sizes are usually given in inches. This unit of measurement simply compares the diagonal length from the lower left to the upper right corner of the display and is thus universally applicable. This device has a screen diagonal of 24 inches ( 61.1 cm on the diagonal). As already known, two monitors with different outer dimensions can have the same screen diagonal. In the case of the monitor ProLite XU2495WSU-B1 , we find an aspect ratio of 1.6 to 1. This means that for every 1 pixels in height, 1.6 pixels in width are added. For comparison: A classic CRT monitor had an aspect ratio of 4:3. Approximately 90 % of the front surface of the monitor is covered by the display, while the remaining area consists of screen edges that do not allow any image output. If you want to set up several monitors next to each other, it is advisable to prefer models with the narrowest possible edges. The display is a IPS panel. The panel has a resolution of 1920 x 1200 px. The pixel density is 94 ppi. The pixel pitch is 0.27 mm. The continuous possible brightness specified by the manufacturer Iiyama is 300 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. Iiyama promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the ProLite XU2495WSU-B1 24 khz to 82 khz. Vertically, however, the image renews at a minimum rate of 46 hz up to 66 hz. The minimum response time of the monitor is ms. The display panel is Anti-glare/Matte (3H).
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. According to the manufacturer, the coverage of the NTSC 1953 color space is 72 %.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from Iiyama has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 5000000 : 1 of dynamic contrast ratio for the monitor ProLite XU2495WSU-B1 cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.
HDR
The monitor supports all HDR modes listed here:
screen design
For the installation of the monitor, a space requirement of approximately 35 cm in height, 53.2 cm in width and 4.6 cm in depth is to be assumed.
If you want to place the monitor described here on the desk without a wall mount, you should allow for 42.2 x 53.2 x 21.6 cm (HxWxD) of space. If you want to place the monitor on a table or even transport it, you should expect a weight of 4.45 kg with the stand screwed in.
Rotate, tilt and swivel
The monitor from Iiyama cannot be rotated. The monitor cannot be swiveled. This feature could be retrofitted with a third-party stand. The tilt of the monitor ProLite XU2495WSU-B1 can be individually adjusted to optimize the viewing angle and increase comfort during use. The angle of inclination to the rear is 22. The monitor can be tilted forward by 5 degree.
Ports
The monitor can be connected via 1 VGA ports.
camera
This monitor does not have a camera.
Loudspeaker
The monitor from Iiyama has integrated speakers, for playing sounds, music or speech. The sound is emitted via 2 speakers, which are integrated into the device. Each of the built-in speakers has a contingent of 2 w power.
Features
- Flicker Free: Iiyama 's Flicker Free technology minimizes distracting screen flicker, allowing you to work and/or play longer without restrictions.
- The display/monitor supports Frame Rate Compensation.
Anyone who works a lot on the computer spends many hours a day in front of the screen. Excessive screen work can damage the eyes. This effect can be particularly pronounced during the darker hours and in the winter months. Many monitor manufacturers have now reacted and offer technologies and settings to reduce the blue component, which is primarily controversial. Depending on the manufacturer, these can be called "Low Blue Light", "Low Blue Light Technology", "SoftBlue" or even "Eye Saver Mode" and function differently. However, it is only important that Iiyama offers a technology to reduce the blue content in its monitor ProLite XU2495WSU-B1. "Overdrive" is a feature of the ProLite XU2495WSU-B1 , which improves the response time of the pixels to reduce motion blur. This involves increasing the voltage of the pixels to make them switch more quickly between color values. This allows fast-moving images and videos to be displayed more clearly and smoothly. However, too high an overdrive setting, even on this model from Iiyama , can lead to so-called "ghosting", where a shadow image of the previous image is visible on the current image. It is therefore important to configure the overdrive settings appropriately depending on the monitor and application.
WiFi / Bluetooth
Power consumption
On average, the monitor consumes approximately 23 w. In standby mode, the device consumes approximately 0.5 w. ProLite XU2495WSU-B1 supports a static ECO mode, which for example lowers the refresh rate, reduces brightness and disables AI functions to save energy. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. There are 1.1 amps specified. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
During operation, the ambient temperature must not exceed 35 °C , to ensure full functionality. Below a temperature of 5 °C , the monitor from Iiyama should again not be used. The humidity must not exceed 80 percent. At least, however, 10 percent humidity. The monitor may be stored at a maximum humidity of 85 percent. The minimum humidity during storage should not fall below 5 percent. The maximum storage temperature should be according to Iiyama 60 °C. Minimal were given by Iiyama -20 °C.
Packaging
Additional information