Display, power consumption, dimensions, technologies used, connections, certifications, comfort features. All these keywords can be relevant for a purchase decision, but an exact comparison is often difficult. For this reason, we will summarize as many of the mentioned specifications as possible in an understandable form in the course of this article. Let's start with the most important component of the ProLite E2282HS-B1 from Iiyama.
Display
The monitor belongs to the device class 21 inches ( 54.6 cm on the diagonal). As already mentioned or known, monitors have a certain number of pixels in height and width. In most cases, this is not a 1:1 ratio, which is also the case with the monitor from Iiyama. This monitor has an aspect ratio of 1.778 : 1. This means that every 1.778 pixels in width 1 pixels in height are added. Approximately 81.5 % of the front surface of the monitor is taken up by the display, while the remaining part is screen edges that do not allow the image to be displayed. If you want to place several monitors next to each other, it is advisable to choose models with narrow edges. The display is a TN panel. The panel has a resolution of 1920 x 1080 px. The pixel density is 102 ppi. The pixel pitch is 0.248 mm. The continuous possible brightness specified by the manufacturer Iiyama is 250 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 170 ° (horizontal) viewing angle. Iiyama promises stable color reproduction moreover within a 160 ° vertical angle. The refresh rate is horizontally seen at the ProLite E2282HS-B1 30 khz to 80 khz. Vertically, however, the image renews at a minimum rate of 55 hz up to 75 hz. The minimum response time of the monitor is ms. The display panel is Anti-glare/Matte (3H).
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. According to the manufacturer, the coverage of the NTSC 1953 color space is 72 %.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from Iiyama has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 80000000 : 1 of dynamic contrast ratio for the monitor ProLite E2282HS-B1 cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.
HDR
The monitor supports all HDR modes listed here:
screen design
Without the stand, the monitor comes with a width of 50.5 cm , a height of 31 cm and about 5.6 cm.
If you want to place the monitor described here on the desk without a wall mount, you should allow for 38.2 x 50.5 x 19.3 cm (HxWxD) of space. The device weighs in total (i.e. also measured with the stand) 2.9 kg.
Rotate, tilt and swivel
The monitor from Iiyama cannot be rotated. The monitor cannot be swiveled. This feature could be retrofitted with a third-party stand. It is possible to adjust the tilt angle of the monitor ProLite E2282HS-B1 according to personal preference to ensure ergonomic and comfortable viewing. The angle of inclination to the rear is 22. The monitor can be tilted forward by 5 degree.
Ports
The monitor can be connected via 1 VGA ports.
camera
This monitor does not have a camera.
Loudspeaker
The monitor from Iiyama has integrated speakers, for playing sounds, music or speech. The sound is emitted via 2 speakers, which are integrated into the device. Each of the built-in speakers has a contingent of 1 w power.
Features
- Flicker Free: Iiyama 's Flicker Free technology minimizes distracting screen flicker, allowing you to work and/or play longer without restrictions.
- The display/monitor supports Frame Rate Compensation.
Anyone who works a lot on the computer spends many hours a day in front of the screen. Excessive screen work can damage the eyes. This effect can be particularly pronounced during the darker hours and in the winter months. Many monitor manufacturers have now reacted and offer technologies and settings to reduce the blue component, which is primarily controversial. Depending on the manufacturer, these can be called "Low Blue Light", "Low Blue Light Technology", "SoftBlue" or even "Eye Saver Mode" and function differently. However, it is only important that Iiyama offers a technology to reduce the blue content in its monitor ProLite E2282HS-B1.
WiFi / Bluetooth
Power consumption
The average consumption was given by Iiyama as 21 w. In standby mode, the device consumes approximately 0.5 w. ProLite E2282HS-B1 supports a static ECO mode, which for example lowers the refresh rate, reduces brightness and disables AI functions to save energy. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. There are 1 amps specified. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
The maximum permissible ambient temperature is 35 °C during operation. Below a temperature of 5 °C , the monitor from Iiyama should again not be used. The humidity must not exceed 80 percent. At least, however, 10 percent humidity. The monitor may be stored at a maximum humidity of 85 percent. The minimum humidity during storage should not fall below 5 percent. The maximum storage temperature should be according to Iiyama 60 °C. Minimal were given by Iiyama -20 °C.
Packaging
Additional information