Menu

Iiyama ProLite XUB2495WSU-B3

Product image for ProLite XUB2495WSU-B3

Today we will look at the monitor ProLite XUB2495WSU-B3 from Iiyama from the year 2021. Within this article, we will first take a closer look at the most important feature of a monitor -the display-, then the design, and in the next section we will go into the features of the monitor. Of course, power consumption, certifications, connectivity and other important details will also be considered.

Display

Let's start with the size of the actual display. This is given in inches and measures the screen diagonal of the display. The monitor ProLite XUB2495WSU-B3 has a display size of 24 inches ( 61.1 cm on the diagonal). It should be noted, however, that displays in this category can have different dimensions, since square monitors, for example, can have the same diagonal as a widescreen monitor. Television screens and monitors usually have an aspect ratio of 16:9 (approximately 1.78:1). More rarely, computer monitors are also found with an aspect ratio of 16:10.
Ultrawidemonitors are often manufactured with an aspect ratio of 21:9 (approximately 2.34:1). They are mainly used for computer games and as an alternative to two side-by-side screens. The first devices of this type came onto the market around 2014. Against this backdrop, the monitor ProLite XUB2495WSU-B3 from Iiyama faces an aspect ratio of 1.6 : 1.
In addition to the aspect ratios and the specified screen diagonal, the ratio between the monitor surface and the actual display could also be relevant for some enthusiasts. This ratio represents the general relationship between non-display and display. In other words: Approximately 90 % of the front surface of the monitor consists of the display, while the remaining percent consists of screen edges and is not suitable for image reproduction. If you want to place several monitors next to each other, you should make sure you choose models with the narrowest possible edges. The display is a IPS panel. The panel has a resolution of 1920 x 1200 px. The pixel density is 94 ppi. The pixel pitch is 0.27 mm. The continuous possible brightness specified by the manufacturer Iiyama is 300 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. Iiyama promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the ProLite XUB2495WSU-B3 24 khz to 82 khz. Vertically, however, the image renews at a minimum rate of 46 hz up to 66 hz. The minimum response time of the monitor is ms. The display panel is Anti-glare/Matte (3H).

Color space

The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. According to the manufacturer, the coverage of the NTSC 1953 color space is 72 %.

Contrast ratio

Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from Iiyama has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 5000000 : 1 of dynamic contrast ratio for the monitor ProLite XUB2495WSU-B3 cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.

HDR

The monitor supports all HDR modes listed here:

screen design

The following dimensions must be planned for a free-standing stand without attached feet/stand: 35 cm x 53.2 cm x 4.6 cm (HxWxD)
If you want to place the monitor described here on the desk without a wall mount, you should allow for 38.7 x 53.2 x 21 cm (HxWxD) of space. The base itself has a depth of 21 cm. The width of the stand is 24 cm. The device weighs 5.88 kg with the stand in place. A height-adjustable stand ensures an improved ergonomic posture during use. The monitor can be moved to a maximum height of 13 cm. This value is always measured from the bottom edge of the screen.

Rotate, tilt and swivel

The monitor from Iiyama has a pivot function and can thus be rotated using the included stand. A rotation to the left is possible with up to 90 degree. To the right, the monitor can be rotated by 90 degree. The ProLite XUB2495WSU-B3 can be swiveled when mounted on the included stand. Pivoting to the left is possible up to 45 degree. Pivoting to the right is possible up to 45 degree. Thanks to the tilt function of the ProLite XUB2495WSU-B3 monitor, the screen position can be flexibly adjusted to minimize dazzling light sources and ensure optimum visibility. The angle of inclination to the rear is 22. The monitor can be tilted forward by 5 degree.

Ports

The monitor can be connected via 1 VGA ports.

camera

This monitor does not have a camera.

Loudspeaker

The monitor from Iiyama has integrated speakers, for playing sounds, music or speech. The sound is emitted via 2 speakers, which are integrated into the device. Each of the built-in speakers has a contingent of 2 w power.

Features

  • Flicker Free: Iiyama 's Flicker Free technology minimizes distracting screen flicker, allowing you to work and/or play longer without restrictions.
  • The display/monitor supports Frame Rate Compensation.

Anyone who works a lot on the computer spends many hours a day in front of the screen. Excessive screen work can damage the eyes. This effect can be particularly pronounced during the darker hours and in the winter months. Many monitor manufacturers have now reacted and offer technologies and settings to reduce the blue component, which is primarily controversial. Depending on the manufacturer, these can be called "Low Blue Light", "Low Blue Light Technology", "SoftBlue" or even "Eye Saver Mode" and function differently. However, it is only important that Iiyama offers a technology to reduce the blue content in its monitor ProLite XUB2495WSU-B3.

WiFi / Bluetooth

Power consumption

The average consumption was given by Iiyama as 18 w. In standby mode, the device consumes approximately 0.5 w. When switched off, on the other hand, the monitor consumes only 0.5 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.

Environment

The maximum permissible ambient temperature is 35 °C during operation. Below a temperature of 5 °C , the monitor from Iiyama should again not be used. The humidity must not exceed 80 percent. At least, however, 10 percent humidity. The monitor may be stored at a maximum humidity of 85 percent. The minimum humidity during storage should not fall below 5 percent. The maximum storage temperature should be according to Iiyama 60 °C. Minimal were given by Iiyama -20 °C.

Packaging

The box together with the monitor weighs about 7.59 kg.

Additional information

Has a Vesa Mount (100x100)
Has at least one 3.5mm audio output jack?
The monitor has at least one USB 2 port?
Number of 3.5mm audio output jacks
1
ports.usb.2
4
software.ddc.2b
Has a Vesa Mount?

We are missing something - Can you help?