Within this article we will take a closer look at the technical specifications of the EliteDisplay E241i monitor from HP. For this we will talk about all possible categories that could be relevant. To start with, we will look at the display, talk about the design and in the next section we will go into the features of the monitor. Other features such as power consumption, connectors and certifications will follow later in the text.
Display
Videos and/or other applications can be displayed on the monitor's 24 inches ( 60.9 cm on the diagonal). While classic CRT monitors were built with a screen ratio of 4:3, this monitor has a ratio of 1.6 : 1 (width to height). In addition to the aspect ratios and the specified screen diagonal, the ratio between the monitor surface and the actual display could also be important for some enthusiasts. This ratio describes the general relationship between the non-display area and the display. In other words, approximately 83.3 % of the front surface of the monitor consists of the display, while the remaining percent consists of screen edges and does not enable image reproduction. When setting up several monitors next to each other, it is advisable to prefer models with the narrowest possible edges. The display is a AH panel. The panel has a resolution of 1920 x 1200 px. The pixel density is 94 ppi. The pixel pitch is 0.27 mm. The continuous possible brightness specified by the manufacturer HP is 250 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. HP promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the EliteDisplay E241i 31 khz to 80 khz. Vertically, however, the image renews at a minimum rate of 50 hz up to 60 hz. The minimum response time of the monitor is ms. The average response time of the monitor is about ms. The display panel is Anti-glare/Matte.
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. The coverage of the Adobe RGB 1998 color space is 65 % according to the manufacturer. According to the manufacturer, the coverage of the NTSC 1953 color space is 72 %. According to the manufacturer, the coverage of the SRGB color space is 90 %.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from HP has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 5000000 : 1 of dynamic contrast ratio for the monitor EliteDisplay E241i cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.
HDR
The monitor supports all HDR modes listed here:
screen design
For a possible wall mounting or comparison to the currently owned monitor at the beginning, the dimensions of the monitor without stand/feet: 36.2 cm x 55.6 cm x 5.5 cm (HxWxD)
If you want to place the monitor described here on the desk without a wall mount, you should allow for 51.6 x 55.6 x 27.6 cm (HxWxD) of space. The device weighs 6.58 kg with the stand in place. Without stand, the monitor weighs 4.11 kg. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting. A height-adjustable stand ensures an improved ergonomic posture during use. The monitor can be moved to a maximum height of 15 cm. This value is always measured from the bottom edge of the screen.
Rotate, tilt and swivel
The monitor from HP has a pivot function and can thus be rotated using the included stand. A rotation to the left is possible with up to 0 degree. To the right, the monitor can be rotated by 90 degree. The EliteDisplay E241i can be swiveled when mounted on the included stand. Pivoting to the left is possible up to 180 degree. Pivoting to the right is possible up to 180 degree. The tilt of the monitor EliteDisplay E241i can be individually adjusted to optimize the viewing angle and increase comfort during use. The angle of inclination to the rear is 30. The monitor can be tilted forward by 5 degree.
Ports
The monitor can be connected via 1 VGA ports.
camera
This monitor does not have a camera.
Loudspeaker
Features
- The display/monitor supports Frame Rate Compensation.
Panel manufacturer
Many manufacturers of monitors and TVs fall back on third-party manufacturers, such as Samsung or LG, when choosing the actual display (panel). Thus, many of the monitors have the same panel and, conversely, differ only in their design, additional functionalities, the software used and, of course, the price. Two monitors from HP or another manufacturer with an identical panel do not necessarily have to have the same picture quality, but it is usually a first indicator for a purchase decision. The panel used here is originally from LG Display Samsung and has the model number LM240WU8-SLD4 (LG Display) LTM240CL04 (Samsung).
WiFi / Bluetooth
Power consumption
On average, the monitor consumes approximately 35 w. The maximum power consumption (peak) specified for this monitor is 40 w. In standby mode, the device consumes approximately 0.5 w. When switched off, on the other hand, the monitor consumes only 0.5 w. In ECO mode, the monitor consumes 20 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
The maximum height at which the monitor may be operated, according to the manufacturer's specifications, is 5 km. For temperature, the maximum permissible ambient temperature is 35 °C. Below a temperature of 5 °C , the monitor from HP should again not be used. The humidity must not exceed 80 percent. At least, however, 20 percent humidity. The monitor may be stored at a maximum humidity of 95 percent. The minimum humidity during storage should not fall below 5 percent. The maximum storage temperature should be according to HP 60 °C. Minimal were given by HP -20 °C. According to the manufacturer, the monitor may be stored at a maximum height of 12.192 km.
Packaging
Additional information