Within this article we will take a closer look at the technical specifications of the V242h monitor from HP. For this we will talk about all possible categories that could be relevant. To start with, we will look at the display, talk about the design and in the next section we will go into the features of the monitor. Other features such as power consumption, connectors and certifications will follow later in the text.
Display
Let's start with the size of the actual display. This is given in inches and measures the screen diagonal of the display. The monitor V242h has a display size of 24 inches ( 60.9 cm on the diagonal). It should be noted, however, that displays in this category can have different dimensions, since square monitors, for example, can have the same diagonal as a widescreen monitor. Let's keep it short and sweet. The monitor has an aspect ratio of 1.778 : 1. Approximately 82.6 % of the front surface of the monitor is covered by the display, while the remaining area consists of screen edges that do not allow any image output. If you want to set up several monitors next to each other, it is advisable to prefer models with the narrowest possible edges. The display is a TN panel. The panel has a resolution of 1920 x 1080 px. The pixel density is 91 ppi. The pixel pitch is 0.277 mm. The continuous possible brightness specified by the manufacturer HP is 250 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 170 ° (horizontal) viewing angle. HP promises stable color reproduction moreover within a 160 ° vertical angle. The refresh rate is horizontally seen at the V242h 31 khz to 80 khz. Vertically, however, the image renews at a minimum rate of 50 hz up to 76 hz. The minimum response time of the monitor is ms. The display panel is Anti-glare/Matte.
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. According to the manufacturer, the coverage of the NTSC 1953 color space is 72 %.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from HP has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 10000000 : 1 of dynamic contrast ratio for the monitor V242h cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.
HDR
The monitor supports all HDR modes listed here:
screen design
For the installation of the monitor, a space requirement of approximately 33.9 cm in height, 56.5 cm in width and 5.6 cm in depth is to be assumed.
If you want to place the monitor described here on the desk without a wall mount, you should allow for 41.1 x 56.5 x 20.2 cm (HxWxD) of space. The device weighs 3.39 kg with the stand in place. The monitor V242h without the stand weighs 3.02 kg. This weight reduction should be taken into account for wall or arm mounting, since monitor arms have a maximum load capacity. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting.
Rotate, tilt and swivel
The monitor from HP cannot be rotated. The monitor cannot be swiveled. This feature could be retrofitted with a third-party stand. It is possible to adjust the tilt angle of the monitor V242h according to personal preference to ensure ergonomic and comfortable viewing. The angle of inclination to the rear is 22. The monitor can be tilted forward by 4 degree.
Ports
The monitor can be connected via 1 VGA ports.
camera
This monitor does not have a camera.
Loudspeaker
Features
- The display/monitor supports Frame Rate Compensation.
Panel manufacturer
Many manufacturers of monitors and TVs fall back on third-party manufacturers, such as Samsung or LG, when choosing the actual display (panel). Thus, many of the monitors have the same panel and, conversely, differ only in their design, additional functionalities, the software used and, of course, the price. Two monitors from HP or another manufacturer with an identical panel do not necessarily have to have the same picture quality, but it is usually a first indicator for a purchase decision. The panel used here is originally from AU Optronics and has the model number M240HTN01.2.
WiFi / Bluetooth
Power consumption
The average consumption was given by HP as 18.43 w. In standby mode, the device consumes approximately 0.29 w. When switched off, on the other hand, the monitor consumes only 0.16 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
The maximum height at which the monitor may be operated, according to the manufacturer's specifications, is 5 km. The maximum permissible ambient temperature is 35 °C during operation. Below a temperature of 5 °C , the monitor from HP should again not be used. The humidity must not exceed 80 percent. At least, however, 20 percent humidity. The monitor may be stored at a maximum humidity of 95 percent. The minimum humidity during storage should not fall below 5 percent. The maximum storage temperature should be according to HP 60 °C. Minimal were given by HP -20 °C. According to the manufacturer, the monitor may be stored at a maximum height of 12.192 km.
Packaging
Additional information