Display, power consumption, dimensions, technologies used, connections, certifications, comfort features. All these keywords can be relevant for a purchase decision, but an exact comparison is often difficult. For this reason, we will summarize as many of the mentioned specifications as possible in an understandable form in the course of this article. Let's start with the most important component of the EliteDisplay E202 from HP.
Display
According to the manufacturer, the display measures 20 inches ( 50.8 cm on the diagonal). While classic CRT monitors were built with a screen ratio of 4:3, this monitor has a ratio of 1.778 : 1 (width to height). In addition to the aspect ratios and the specified screen diagonal, some enthusiasts may also be interested in the ratio between the monitor surface and the actual display. This ratio describes the general relationship between non-display and display. In other words, approximately 77.5 % of the front surface of the monitor consists of the display, while the rest consists of screen edges and cannot display an image. When setting up several monitors next to each other, it is advisable to give preference to models with the narrowest possible edges. The display is a PLS panel. The panel has a resolution of 1600 x 900 px. The pixel density is 91 ppi. The pixel pitch is 0.277 mm. The continuous possible brightness specified by the manufacturer HP is 250 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. HP promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the EliteDisplay E202 30 khz to 70 khz. Vertically, however, the image renews at a minimum rate of 50 hz up to 75 hz. The minimum response time of the monitor is ms. The average response time of the monitor is about ms. The display panel is Anti-glare/Matte.
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. According to the manufacturer, the coverage of the NTSC 1953 color space is 72 %.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from HP has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 5000000 : 1 of dynamic contrast ratio for the monitor EliteDisplay E202 cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.
HDR
The monitor supports all HDR modes listed here:
screen design
For a possible wall mounting or comparison to the currently owned monitor at the beginning, the dimensions of the monitor without stand/feet: 29.6 cm x 47.9 cm x 4.9 cm (HxWxD)
The size of the EliteDisplay E202 on the desk is likely to be particularly relevant for most users. HP specifies a space requirement of 49.3 x 47.9 x 18.9 cm (HxWxD) with the included stand. As for the weight, HP states a total weight of 4.8 kg with stand. The monitor EliteDisplay E202 without the stand weighs 2.8 kg. This weight reduction should be taken into account for wall or arm mounting, since monitor arms have a maximum load capacity. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting. A height-adjustable stand ensures an improved ergonomic posture during use. The monitor can be moved to a maximum height of 15 cm. This value is always measured from the bottom edge of the screen.
Rotate, tilt and swivel
The monitor from HP has a pivot function and can thus be rotated using the included stand. A rotation to the left is possible with up to 0 degree. To the right, the monitor can be rotated by 90 degree. The EliteDisplay E202 can be swiveled when mounted on the included stand. Pivoting to the left is possible up to 45 degree. Pivoting to the right is possible up to 45 degree. The monitor EliteDisplay E202 can be tilted. The angle of inclination to the rear is 25. The monitor can be tilted forward by 5 degree.
Ports
The monitor can be connected via 1 VGA ports.
camera
This monitor does not have a camera.
Loudspeaker
Features
- The display/monitor supports Frame Rate Compensation.
Panel manufacturer
Many manufacturers of monitors and TVs fall back on third-party manufacturers, such as Samsung or LG, when choosing the actual display (panel). Thus, many of the monitors have the same panel and, conversely, differ only in their design, additional functionalities, the software used and, of course, the price. Two monitors from HP or another manufacturer with an identical panel do not necessarily have to have the same picture quality, but it is usually a first indicator for a purchase decision. The panel used here is originally from Samsung and has the model number LTM200KL01.
WiFi / Bluetooth
Power consumption
On average, the monitor consumes approximately 22 w. The maximum power consumption (peak) specified for this monitor is 33 w. In standby mode, the device consumes approximately 0.5 w. When switched off, on the other hand, the monitor consumes only 0.5 w. In ECO mode, the monitor consumes 14.3 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
The maximum height at which the monitor may be operated, according to the manufacturer's specifications, is 5 km. The maximum permissible ambient temperature is 35 °C during operation. Below a temperature of 5 °C , the monitor from HP should again not be used. The humidity must not exceed 80 percent. At least, however, 20 percent humidity. The monitor may be stored at a maximum humidity of 95 percent. The minimum humidity during storage should not fall below 5 percent. The maximum storage temperature should be according to HP 60 °C. Minimal were given by HP -20 °C. According to the manufacturer, the monitor may be stored at a maximum height of 12.192 km.
Packaging
The monitor is packaged in a cardboard box measuring 35 x 56.8 x 22.5 cm (height x width x depth). The box together with the monitor weighs about 6.2 kg.
Additional information