Within this article we will take a closer look at the technical specifications of the 25es monitor from HP. For this we will talk about all possible categories that could be relevant. To start with, we will look at the display, talk about the design and in the next section we will go into the features of the monitor. Other features such as power consumption, connectors and certifications will follow later in the text.
Display
Texts, videos and/or other applications can be displayed on the 25 inches ( 63.4 cm on the diagonal) of the monitor. Television screens and monitors usually have an aspect ratio of 16:9 (approximately 1.78:1). More rarely, computer monitors are also found with an aspect ratio of 16:10.
Ultrawidemonitors are often manufactured with an aspect ratio of 21:9 (approximately 2.34:1). They are mainly used for computer games and as an alternative to two side-by-side screens. The first devices of this type came onto the market around 2014. Against this backdrop, the monitor 25es from HP faces an aspect ratio of 1.778 : 1. Besides the aspect ratios and the specified screen diagonal, the ratio between the monitor surface and the actual display is probably also relevant for some enthusiasts. This is the general ratio of non-display to display. In other words, 87.4 % of the monitor's front area consists of the display. The remaining percent consists of screen edges and cannot display an image. If you want to place several monitors next to each other, you should make sure that the edges are as small as possible. The display is a IPS panel. The panel has a resolution of 1920 x 1080 px. The pixel density is 88 ppi. The pixel pitch is 0.288 mm. The continuous possible brightness specified by the manufacturer HP is 250 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. HP promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the 25es 30 khz to 80 khz. Vertically, however, the image renews at a minimum rate of 50 hz up to 60 hz. The minimum response time of the monitor is ms. The average response time of the monitor is about ms. The display panel is Anti-glare/Matte (3H).
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. According to the manufacturer, the coverage of the NTSC 1953 color space is 72 %.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from HP has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 10000000 : 1 of dynamic contrast ratio for the monitor 25es cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.
HDR
The monitor supports all HDR modes listed here:
screen design
HP Specifies the following dimensions for the monitor 25es without stand/feet: 34.1 cm x 57.6 cm x 3.5 cm (HxWxD)
The size of the 25es on the desk is likely to be particularly relevant for most users. HP specifies a space requirement of 42.5 x 57.6 x 19.4 cm (HxWxD) with the included stand. If you want to place the monitor on a table or even transport it, you should expect a weight of 3.37 kg with the stand screwed in. The monitor 25es without the stand weighs 2.96 kg. This weight reduction should be taken into account for wall or arm mounting, since monitor arms have a maximum load capacity.
Rotate, tilt and swivel
The monitor from HP cannot be rotated. The monitor cannot be swiveled. This feature could be retrofitted with a third-party stand. The tilt of the monitor 25es can be individually adjusted to optimize the viewing angle and increase comfort during use. The angle of inclination to the rear is 25. The monitor can be tilted forward by 2 degree.
Ports
The monitor can be connected via 1 VGA ports.
camera
This monitor does not have a camera.
Loudspeaker
Features
- The display/monitor supports Frame Rate Compensation.
WiFi / Bluetooth
Power consumption
On average, the monitor consumes approximately 24 w. The maximum power consumption (peak) specified for this monitor is 28 w. In standby mode, the device consumes approximately 0.2 w. When switched off, on the other hand, the monitor consumes only 0.12 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
The maximum height at which the monitor may be operated, according to the manufacturer's specifications, is 5 km. The maximum permissible ambient temperature is 35 °C during operation. Below a temperature of 5 °C , the monitor from HP should again not be used. The humidity must not exceed 80 percent. At least, however, 20 percent humidity. The monitor may be stored at a maximum humidity of 95 percent. The minimum humidity during storage should not fall below 5 percent. The maximum storage temperature should be according to HP 60 °C. Minimal were given by HP -34 °C. According to the manufacturer, the monitor may be stored at a maximum height of 12.192 km.
Packaging
Additional information