Display, power consumption, dimensions, technologies used, connections, certifications, comfort features. All these keywords can be relevant for a purchase decision, but an exact comparison is often difficult. For this reason, we will summarize as many of the mentioned specifications as possible in an understandable form in the course of this article. Let's start with the most important component of the 23f from HP.
Display
Let's start with the most important component of a monitor, the display. Depending on the aspect ratio of height and width, monitors can be rather wide or square, for example. Besides the pure physical dimensions, the resolution of the display and thus the quality of the display is also decisive here. For easy comparability, however, screen sizes are usually given in inches. This unit of measurement simply compares the diagonal length from the lower left to the upper right corner of the display and is thus universally applicable. This device has a screen diagonal of 23 inches ( 58.4 cm on the diagonal). Television screens and monitors usually have an aspect ratio of 16:9 (approximately 1.78:1). More rarely, computer monitors are also found with an aspect ratio of 16:10.
Ultrawidemonitors are often manufactured with an aspect ratio of 21:9 (approximately 2.34:1). They are mainly used for computer games and as an alternative to two side-by-side screens. The first devices of this type came onto the market around 2014. Against this backdrop, the monitor 23f from HP faces an aspect ratio of 1.778 : 1. Approximately 88.9 % of the front surface of the monitor is taken up by the display, while the remaining part is screen edges that do not allow the image to be displayed. If you want to place several monitors next to each other, it is advisable to choose models with narrow edges. The display is a IPS panel. The panel has a resolution of 1920 x 1080 px. The pixel density is 95 ppi. The pixel pitch is 0.265 mm. The continuous possible brightness specified by the manufacturer HP is 300 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. HP promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the 23f 30 khz to 86 khz. Vertically, however, the image renews at a minimum rate of 48 hz up to 75 hz. The minimum response time of the monitor is ms. The maximum response time of the monitor is ms. The average response time of the monitor is about ms. The display panel is Anti-glare/Matte.
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. According to the manufacturer, the coverage of the NTSC 1953 color space is 72 %.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from HP has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 10000000 : 1 of dynamic contrast ratio for the monitor 23f cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.
HDR
The monitor supports all HDR modes listed here:
screen design
HP Specifies the following dimensions for the monitor 23f without stand/feet: 31.4 cm x 52.1 cm x 3.9 cm (HxWxD)
If you want to place the monitor described here on the desk without a wall mount, you should allow for 39.8 x 52.1 x 18.3 cm (HxWxD) of space. The device weighs in total (i.e. also measured with the stand) 2.6 kg.
Rotate, tilt and swivel
The monitor from HP cannot be rotated. The monitor cannot be swiveled. This feature could be retrofitted with a third-party stand. Thanks to the tilt function of the 23f monitor, the screen position can be flexibly adjusted to minimize dazzling light sources and ensure optimum visibility. The angle of inclination to the rear is 25. The monitor can be tilted forward by 5 degree.
Ports
The monitor can be connected via 1 VGA ports.
camera
This monitor does not have a camera.
Loudspeaker
Features
- AMD FreeSync: By dynamically synchronizing the refresh rate of the 23f with the frame rate, AMD FreeSync minimizes judder and ensures smooth and enjoyable gameplay.
- The display/monitor supports Frame Rate Compensation.
Anyone who works a lot on the computer spends many hours a day in front of the screen. Excessive screen work can damage the eyes. This effect can be particularly pronounced during the darker hours and in the winter months. Many monitor manufacturers have now reacted and offer technologies and settings to reduce the blue component, which is primarily controversial. Depending on the manufacturer, these can be called "Low Blue Light", "Low Blue Light Technology", "SoftBlue" or even "Eye Saver Mode" and function differently. However, it is only important that HP offers a technology to reduce the blue content in its monitor 23f.
WiFi / Bluetooth
Power consumption
The average consumption figure for 23f is 20 w. The maximum power consumption (peak) specified for this monitor is 22 w. In standby mode, the device consumes approximately 0.5 w. When switched off, on the other hand, the monitor consumes only 0.3 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
For temperature, the maximum permissible ambient temperature is 40 °C. Below a temperature of 0 °C , the monitor from HP should again not be used. The humidity must not exceed 80 percent. At least, however, 20 percent humidity. The monitor may be stored at a maximum humidity of 90 percent. The minimum humidity during storage should not fall below 10 percent. The maximum storage temperature should be according to HP 65 °C. Minimal were given by HP -20 °C.
Packaging
Additional information