Display, power consumption, dimensions, technologies used, connections, certifications, comfort features. All these keywords can be relevant for a purchase decision, but an exact comparison is often difficult. For this reason, we will summarize as many of the mentioned specifications as possible in an understandable form in the course of this article. Let's start with the most important component of the V190 from HP.
Display
Let's start with the size of the display. It is 18 inches ( 47 cm on the diagonal) large and should thus offer enough space for all contents according to HP. For books or documents, a portrait format layout is usually used because the reading flow decreases as the width of the text increases. For small diagonals, screens in 4:3 format have a clear advantage because they are better suited for display due to their height. In contrast, widescreen monitors are better suited for playing video games or displaying several documents side by side, for example. Depending on the application, it should be decided individually whether the aspect ratio of 1.779 : 1 is sufficient. In addition to the aspect ratios and the specified screen diagonal, the ratio between the monitor surface and the actual display could also be important for some enthusiasts. This ratio describes the general relationship between the non-display area and the display. In other words, approximately 79.1 % of the front surface of the monitor consists of the display, while the remaining percent consists of screen edges and does not enable image reproduction. When setting up several monitors next to each other, it is advisable to prefer models with the narrowest possible edges. The display is a TN panel. The panel has a resolution of 1366 x 768 px. The pixel density is 84 ppi. The pixel pitch is 0.3 mm. The continuous possible brightness specified by the manufacturer HP is 200 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 170 ° (horizontal) viewing angle. HP promises stable color reproduction moreover within a 160 ° vertical angle. The refresh rate is horizontally seen at the V190 30 khz to 70 khz. Vertically, however, the image renews at a minimum rate of 50 hz up to 60 hz. The minimum response time of the monitor is ms. The display panel is Anti-glare/Matte.
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. According to the manufacturer, the coverage of the NTSC 1953 color space is 72 %. According to the manufacturer, the coverage of the SRGB color space is 99 %.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from HP has a static contrast ratio of 600 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 10000000 : 1 of dynamic contrast ratio for the monitor V190 cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.
HDR
The monitor supports all HDR modes listed here:
screen design
Without the stand, the monitor comes with a width of 43.9 cm , a height of 27.1 cm and about 4.5 cm.
If you want to place the monitor described here on the desk without a wall mount, you should allow for 34.5 x 43.9 x 22.3 cm (HxWxD) of space. The device weighs in total (i.e. also measured with the stand) 2.4 kg. Without stand, the monitor weighs 1.9 kg. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting.
Rotate, tilt and swivel
The monitor from HP cannot be rotated. The monitor cannot be swiveled. This feature could be retrofitted with a third-party stand. The tilt of the monitor V190 can be individually adjusted to optimize the viewing angle and increase comfort during use. The angle of inclination to the rear is 20. The monitor can be tilted forward by 4 degree.
Ports
The monitor can be connected via 1 VGA ports.
camera
This monitor does not have a camera.
Loudspeaker
Features
- Flicker Free: HP 's Flicker Free technology minimizes distracting screen flicker, allowing you to work and/or play longer without restrictions.
- The display/monitor supports Frame Rate Compensation.
Anyone who works a lot on the computer spends many hours a day in front of the screen. Excessive screen work can damage the eyes. This effect can be particularly pronounced during the darker hours and in the winter months. Many monitor manufacturers have now reacted and offer technologies and settings to reduce the blue component, which is primarily controversial. Depending on the manufacturer, these can be called "Low Blue Light", "Low Blue Light Technology", "SoftBlue" or even "Eye Saver Mode" and function differently. However, it is only important that HP offers a technology to reduce the blue content in its monitor V190.
Panel manufacturer
Many manufacturers of monitors and TVs fall back on third-party manufacturers, such as Samsung or LG, when choosing the actual display (panel). Thus, many of the monitors have the same panel and, conversely, differ only in their design, additional functionalities, the software used and, of course, the price. Two monitors from HP or another manufacturer with an identical panel do not necessarily have to have the same picture quality, but it is usually a first indicator for a purchase decision. The panel used here is originally from BOE and has the model number HM185WX3-???.
WiFi / Bluetooth
Power consumption
The average consumption was given by HP as 10.5 w. The maximum power consumption (peak) specified for this monitor is 12 w. In standby mode, the device consumes approximately 0.5 w. When switched off, on the other hand, the monitor consumes only 0.5 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
During operation, the ambient temperature must not exceed 35 °C , to ensure full functionality. Below a temperature of 5 °C , the monitor from HP should again not be used. The humidity must not exceed 80 percent. At least, however, 20 percent humidity. The monitor may be stored at a maximum humidity of 95 percent. The minimum humidity during storage should not fall below 5 percent. The maximum storage temperature should be according to HP 65 °C. Minimal were given by HP -34 °C.
Packaging
Additional information