Within this article we will take a closer look at the technical specifications of the Z27q G3 QHD monitor from HP. For this we will talk about all possible categories that could be relevant. To start with, we will look at the display, talk about the design and in the next section we will go into the features of the monitor. Other features such as power consumption, connectors and certifications will follow later in the text.
Display
Let's start with the size of the actual display. This information is given in inches and measures the screen diagonal of the display. It can happen that displays with the same size specification have different dimensions, since square monitors, for example, can belong to the same category as a widescreen monitor. The monitor from HP in this article has a size of 27 inches ( 68.5 cm on the diagonal). For books or documents, a portrait format layout is usually used because the reading flow decreases as the width of the text increases. For small diagonals, screens in 4:3 format have a clear advantage because they are better suited for display due to their height. In contrast, widescreen monitors are better suited for playing video games or displaying several documents side by side, for example. Depending on the application, it should be decided individually whether the aspect ratio of 1.778 : 1 is sufficient. Besides the aspect ratios and the specified screen diagonal, the ratio between the monitor surface and the actual display is probably also relevant for some enthusiasts. This is the general ratio of non-display to display. In other words, 91.8 % of the monitor's front area consists of the display. The remaining percent consists of screen edges and cannot display an image. If you want to place several monitors next to each other, you should make sure that the edges are as small as possible. The display is a IPS panel. The panel has a resolution of 2560 x 1440 px. The pixel density is 109 ppi. The pixel pitch is 0.233 mm. The continuous possible brightness specified by the manufacturer HP is 350 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. HP promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the Z27q G3 QHD 30 khz to 90 khz. Vertically, however, the image renews at a minimum rate of 50 hz up to 60 hz. The minimum response time of the monitor is ms. The display panel is Anti-glare/Matte.
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. According to the manufacturer, the coverage of the SRGB color space is 99 %.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from HP has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 10000000 : 1 of dynamic contrast ratio for the monitor Z27q G3 QHD cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.
HDR
The monitor supports all HDR modes listed here:
screen design
HP Specifies the following dimensions for the monitor Z27q G3 QHD without stand/feet: 35.6 cm x 61.2 cm x 3.8 cm (HxWxD)
If you want to place the monitor described here on the desk without a wall mount, you should allow for 38 x 61.2 x 20.5 cm (HxWxD) of space. The device weighs in total (i.e. also measured with the stand) 5.8 kg. The monitor Z27q G3 QHD without the stand weighs 4.3 kg. This weight reduction should be taken into account for wall or arm mounting, since monitor arms have a maximum load capacity. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting. A height-adjustable stand ensures an improved ergonomic posture during use. The monitor can be moved to a maximum height of 15 cm. This value is always measured from the bottom edge of the screen.
Rotate, tilt and swivel
The monitor from HP has a pivot function and can thus be rotated using the included stand. A rotation to the left is possible with up to 0 degree. To the right, the monitor can be rotated by 90 degree. The Z27q G3 QHD can be swiveled when mounted on the included stand. Pivoting to the left is possible up to 45 degree. Pivoting to the right is possible up to 45 degree. It is possible to adjust the tilt angle of the monitor Z27q G3 QHD according to personal preference to ensure ergonomic and comfortable viewing. The angle of inclination to the rear is 20. The monitor can be tilted forward by 5 degree.
Ports
camera
This monitor does not have a camera.
Loudspeaker
Features
- Flicker Free: HP 's Flicker Free technology minimizes distracting screen flicker, allowing you to work and/or play longer without restrictions.
- The display/monitor supports Frame Rate Compensation.
Anyone who works a lot on the computer spends many hours a day in front of the screen. Excessive screen work can damage the eyes. This effect can be particularly pronounced during the darker hours and in the winter months. Many monitor manufacturers have now reacted and offer technologies and settings to reduce the blue component, which is primarily controversial. Depending on the manufacturer, these can be called "Low Blue Light", "Low Blue Light Technology", "SoftBlue" or even "Eye Saver Mode" and function differently. However, it is only important that HP offers a technology to reduce the blue content in its monitor Z27q G3 QHD.
WiFi / Bluetooth
Power consumption
The average consumption figure for Z27q G3 QHD is 35 w. The maximum power consumption (peak) specified for this monitor is 69 w. In standby mode, the device consumes approximately 0.5 w. When switched off, on the other hand, the monitor consumes only 0.5 w. In ECO mode, the monitor consumes 23 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
The maximum height at which the monitor may be operated, according to the manufacturer's specifications, is 5 km. The maximum permissible ambient temperature is 35 °C during operation. Below a temperature of 5 °C , the monitor from HP should again not be used. The humidity must not exceed 80 percent. At least, however, 20 percent humidity. The monitor may be stored at a maximum humidity of 95 percent. The minimum humidity during storage should not fall below 5 percent. The maximum storage temperature should be according to HP 60 °C. Minimal were given by HP -20 °C. According to the manufacturer, the monitor may be stored at a maximum height of 12.192 km.
Packaging
The monitor is packaged in a cardboard box measuring 42.3 x 69.8 x 16.3 cm (height x width x depth). The box together with the monitor weighs about 9.1 kg.
Additional information