Display, power consumption, dimensions, technologies used, connections, certifications, comfort features. All these keywords can be relevant for a purchase decision, but an exact comparison is often difficult. For this reason, we will summarize as many of the mentioned specifications as possible in an understandable form in the course of this article. Let's start with the most important component of the B34-9 UE from Fujitsu.
Display
34 inches ( 86.3 cm on the diagonal) offer sufficient space for texts in any office applications, for example. As already mentioned or known, monitors have a certain number of pixels in height and width. In most cases, this is not a 1:1 ratio, which is also the case with the monitor from Fujitsu. This monitor has an aspect ratio of 2.389 : 1. This means that every 2.389 pixels in width 1 pixels in height are added. Approximately 88 % of the front surface of the monitor is taken up by the display, while the remaining part is screen edges that do not allow the image to be displayed. If you want to place several monitors next to each other, it is advisable to choose models with narrow edges. The display is a AH panel. The panel has a resolution of 3440 x 1440 px. The pixel density is 109 ppi. The pixel pitch is 0.233 mm. The continuous possible brightness specified by the manufacturer Fujitsu is 300 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. Fujitsu promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the B34-9 UE 30 khz to 160 khz. Vertically, however, the image renews at a minimum rate of 48 hz up to 102 hz. The minimum response time of the monitor is ms. The average response time of the monitor is about ms. The display panel is Anti-glare/Matte (3H).
Color space
The panel has a bit depth of 10 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from Fujitsu has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 20000000 : 1 of dynamic contrast ratio for the monitor B34-9 UE cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.
HDR
The monitor supports all HDR modes listed here:
screen design
The monitor has a width of 81.6 cm without its attached stand/stand. The height is dimensioned at about 37.2 cm , while the for the depth of the monitor should be kept free at about 10.2 cm.
The size of the monitor (stand included) is 39.7 x 81.6 x 27.5 cm (HxWxD). The device weighs 9.1 kg with the stand in place. The monitor B34-9 UE without the stand weighs 6.3 kg. This weight reduction should be taken into account for wall or arm mounting, since monitor arms have a maximum load capacity. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting. A height-adjustable stand ensures an improved ergonomic posture during use. The monitor can be moved to a maximum height of 13 cm. This value is always measured from the bottom edge of the screen.
Curved
The B34-9 UE is a curved monitor with a curvature of 1.9 m
Rotate, tilt and swivel
The monitor from Fujitsu cannot be rotated. The B34-9 UE can be swiveled when mounted on the included stand. Pivoting to the left is possible up to 170 degree. Pivoting to the right is possible up to 170 degree. The monitor B34-9 UE offers the option of adjusting the tilt as required to create an ergonomic working environment and reduce visual fatigue. The angle of inclination to the rear is 25. The monitor can be tilted forward by 5 degree.
Ports
camera
This monitor does not have a camera.
Loudspeaker
The monitor from Fujitsu has integrated speakers, for playing sounds, music or speech. The sound is emitted via 2 speakers, which are integrated into the device. Each of the built-in speakers has a contingent of 3 w power.
Features
- Flicker Free: Fujitsu 's Flicker Free technology minimizes distracting screen flicker, allowing you to work and/or play longer without restrictions.
- The display/monitor supports Frame Rate Compensation.
Anyone who works a lot on the computer spends many hours a day in front of the screen. Excessive screen work can damage the eyes. This effect can be particularly pronounced during the darker hours and in the winter months. Many monitor manufacturers have now reacted and offer technologies and settings to reduce the blue component, which is primarily controversial. Depending on the manufacturer, these can be called "Low Blue Light", "Low Blue Light Technology", "SoftBlue" or even "Eye Saver Mode" and function differently. However, it is only important that Fujitsu offers a technology to reduce the blue content in its monitor B34-9 UE.
WiFi / Bluetooth
Power consumption
On average, the monitor consumes approximately 39 w. The maximum power consumption (peak) specified for this monitor is 63 w. In standby mode, the device consumes approximately 0.25 w. When switched off, on the other hand, the monitor consumes only 0.19 w. In ECO mode, the monitor consumes 32.23 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
During operation, the ambient temperature must not exceed 35 °C , to ensure full functionality. Below a temperature of 5 °C , the monitor from Fujitsu should again not be used. The humidity must not exceed 85 percent. At least, however, 10 percent humidity.
Packaging
The box together with the monitor weighs about 11 kg.
Additional information