Within this article we will take a closer look at the technical specifications of the P27-9 TS QHD monitor from Fujitsu. For this we will talk about all possible categories that could be relevant. To start with, we will look at the display, talk about the design and in the next section we will go into the features of the monitor. Other features such as power consumption, connectors and certifications will follow later in the text.
Display
Let's start with the most important component of a monitor, the display. Depending on the aspect ratio of height and width, monitors can be rather wide or square, for example. Besides the pure physical dimensions, the resolution of the display and thus the quality of the display is also decisive here. For easy comparability, however, screen sizes are usually given in inches. This unit of measurement simply compares the diagonal length from the lower left to the upper right corner of the display and is thus universally applicable. This device has a screen diagonal of 27 inches ( 68.4 cm on the diagonal). For books or documents, a portrait format layout is usually used because the reading flow decreases as the width of the text increases. For small diagonals, screens in 4:3 format have a clear advantage because they are better suited for display due to their height. In contrast, widescreen monitors are better suited for playing video games or displaying several documents side by side, for example. Depending on the application, it should be decided individually whether the aspect ratio of 1.778 : 1 is sufficient. In addition to the aspect ratios and the specified screen diagonal, some enthusiasts may also be interested in the ratio between the monitor surface and the actual display. This ratio describes the general relationship between non-display and display. In other words, approximately 89.7 % of the front surface of the monitor consists of the display, while the rest consists of screen edges and cannot display an image. When setting up several monitors next to each other, it is advisable to give preference to models with the narrowest possible edges. The display is a IPS panel. The panel has a resolution of 2560 x 1440 px. The pixel density is 109 ppi. The pixel pitch is 0.233 mm. The continuous possible brightness specified by the manufacturer Fujitsu is 350 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. Fujitsu promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the P27-9 TS QHD 30 khz to 100 khz. Vertically, however, the image renews at a minimum rate of 48 hz up to 76 hz. The minimum response time of the monitor is ms. The display panel is Anti-glare/Matte (3H).
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. According to the manufacturer, the coverage of the SRGB color space is 100 %.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from Fujitsu has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 20000000 : 1 of dynamic contrast ratio for the monitor P27-9 TS QHD cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.
HDR
The monitor supports all HDR modes listed here:
screen design
Fujitsu Specifies the following dimensions for the monitor P27-9 TS QHD without stand/feet: 36.3 cm x 61.2 cm x 6.3 cm (HxWxD)
The size of the monitor (stand included) is 27.5 x 61.2 x 38.5 cm (HxWxD). The device weighs in total (i.e. also measured with the stand) 7.88 kg. The monitor P27-9 TS QHD without the stand weighs 5.32 kg. This weight reduction should be taken into account for wall or arm mounting, since monitor arms have a maximum load capacity. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting. A height-adjustable stand ensures an improved ergonomic posture during use. The monitor can be moved to a maximum height of 15 cm. This value is always measured from the bottom edge of the screen.
Rotate, tilt and swivel
The monitor from Fujitsu has a pivot function and can thus be rotated using the included stand. A rotation to the left is possible with up to 90 degree. To the right, the monitor can be rotated by 90 degree. The P27-9 TS QHD can be swiveled when mounted on the included stand. Pivoting to the left is possible up to 172 degree. Pivoting to the right is possible up to 172 degree. The monitor P27-9 TS QHD can be tilted. The angle of inclination to the rear is 35. The monitor can be tilted forward by 5 degree.
Ports
Daisy chaining is supported, which means that one cable (usually USB-C or Displayport) on the computer/laptop is sufficient to connect multiple monitors at the same time. One cable is connected to the computer/laptop and the second monitor is connected to the output of the first monitor.
camera
This monitor does not have a camera.
Loudspeaker
Features
- Flicker Free: Fujitsu 's Flicker Free technology minimizes distracting screen flicker, allowing you to work and/or play longer without restrictions.
Anyone who works a lot on the computer spends many hours a day in front of the screen. Excessive screen work can damage the eyes. This effect can be particularly pronounced during the darker hours and in the winter months. Many monitor manufacturers have now reacted and offer technologies and settings to reduce the blue component, which is primarily controversial. Depending on the manufacturer, these can be called "Low Blue Light", "Low Blue Light Technology", "SoftBlue" or even "Eye Saver Mode" and function differently. However, it is only important that Fujitsu offers a technology to reduce the blue content in its monitor P27-9 TS QHD. "Overdrive" is a feature of the P27-9 TS QHD , which improves the response time of the pixels to reduce motion blur. This involves increasing the voltage of the pixels to make them switch more quickly between color values. This allows fast-moving images and videos to be displayed more clearly and smoothly. However, too high an overdrive setting, even on this model from Fujitsu , can lead to so-called "ghosting", where a shadow image of the previous image is visible on the current image. It is therefore important to configure the overdrive settings appropriately depending on the monitor and application.
WiFi / Bluetooth
Power consumption
The average consumption figure for P27-9 TS QHD is 20.3 w. The maximum power consumption (peak) specified for this monitor is 30 w. In standby mode, the device consumes approximately 0.24 w. When switched off, on the other hand, the monitor consumes only 0.22 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
For temperature, the maximum permissible ambient temperature is 35 °C. Below a temperature of 5 °C , the monitor from Fujitsu should again not be used. The humidity must not exceed 85 percent. At least, however, 10 percent humidity.
Packaging
The monitor is packaged in a cardboard box measuring 47 x 73.5 x 22.8 cm (height x width x depth). The box together with the monitor weighs about 9.87 kg.
Additional information