Today we will look at the monitor CX271 from EIZO from the year 2013. Within this article, we will first take a closer look at the most important feature of a monitor -the display-, then the design, and in the next section we will go into the features of the monitor. Of course, power consumption, certifications, connectivity and other important details will also be considered.
Display
27 inches ( 68.4 cm on the diagonal) offer sufficient space for texts in any office applications, for example. Let's keep it short and sweet. The monitor has an aspect ratio of 1.778 : 1. Approximately 77.1 % of the front surface of the monitor is covered by the display, while the remaining area consists of screen edges that do not allow any image output. If you want to set up several monitors next to each other, it is advisable to prefer models with the narrowest possible edges. The display is a AH panel. The panel has a resolution of 2560 x 1440 px. The pixel density is 109 ppi. The pixel pitch is 0.233 mm. The continuous possible brightness specified by the manufacturer EIZO is 300 nt. The panel is illuminated by GB-r LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. EIZO promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the CX271 15 khz to 89 khz. Vertically, however, the image renews at a minimum rate of 23.75 hz up to 63 hz. The minimum response time of the monitor is ms. The display panel is Anti-glare/Matte (3H).
Color space
The panel has a bit depth of 10 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. The coverage of the Adobe RGB 1998 color space is 99 % according to the manufacturer. According to the manufacturer, the coverage of the DCI-P3 color space is 93 %. According to the manufacturer, the coverage of the NTSC 1953 color space is 103 %. According to the manufacturer, the coverage of the SRGB color space is 100 %.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from EIZO has a static contrast ratio of 1000 : 1 , according to the manufacturer.
HDR
The monitor supports all HDR modes listed here:
screen design
The following dimensions must be planned for a free-standing stand without attached feet/stand: 40.2 cm x 64.6 cm x 9.2 cm (HxWxD)
The size of the monitor (stand included) is 42.5 x 64.6 x 28.1 cm (HxWxD). If you want to place the monitor on a table or even transport it, you should expect a weight of 12.8 kg with the stand screwed in. A wall mount should be designed for at least 8.8 kg to hold the CX271 neatly and securely. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting. A height-adjustable stand ensures an improved ergonomic posture during use. The monitor can be moved to a maximum height of 15.1 cm. This value is always measured from the bottom edge of the screen.
Rotate, tilt and swivel
The monitor from EIZO has a pivot function and can thus be rotated using the included stand. A rotation to the left is possible with up to 0 degree. To the right, the monitor can be rotated by 90 degree. The CX271 can be swiveled when mounted on the included stand. Pivoting to the left is possible up to 172 degree. Pivoting to the right is possible up to 172 degree. The tilt of the monitor CX271 can be individually adjusted to optimize the viewing angle and increase comfort during use. The angle of inclination to the rear is 25.
Ports
The connection of a device via display port is supported. There are 1 HDMI ports on the monitor.
camera
This monitor does not have a camera.
Loudspeaker
Features
- The display/monitor supports Frame Rate Compensation.
Panel manufacturer
Many manufacturers of monitors and TVs fall back on third-party manufacturers, such as Samsung or LG, when choosing the actual display (panel). Thus, many of the monitors have the same panel and, conversely, differ only in their design, additional functionalities, the software used and, of course, the price. Two monitors from EIZO or another manufacturer with an identical panel do not necessarily have to have the same picture quality, but it is usually a first indicator for a purchase decision. The panel used here is originally from LG Display and has the model number LM270WQ3.
WiFi / Bluetooth
Power consumption
The average consumption figure for CX271 is 43 w. The maximum power consumption (peak) specified for this monitor is 99 w. In standby mode, the device consumes approximately 0.7 w. When switched off, on the other hand, the monitor consumes only 0.5 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
During operation, the ambient temperature must not exceed 35 °C , to ensure full functionality. Below a temperature of 0 °C , the monitor from EIZO should again not be used. The humidity must not exceed 80 percent. At least, however, 20 percent humidity.
Packaging
Additional information