Today we will look at the monitor BL2411PT from BenQ from the year 2013. Within this article, we will first take a closer look at the most important feature of a monitor -the display-, then the design, and in the next section we will go into the features of the monitor. Of course, power consumption, certifications, connectivity and other important details will also be considered.
Display
Let's start with the size of the actual display. This information is given in inches and measures the screen diagonal of the display. It can happen that displays with the same size specification have different dimensions, since square monitors, for example, can belong to the same category as a widescreen monitor. The monitor from BenQ in this article has a size of 24 inches ( 61.1 cm on the diagonal). As already known, two monitors with different outer dimensions can have the same screen diagonal. In the case of the monitor BL2411PT , we find an aspect ratio of 1.6 to 1. This means that for every 1 pixels in height, 1.6 pixels in width are added. For comparison: A classic CRT monitor had an aspect ratio of 4:3. In addition to the aspect ratios and the specified screen diagonal, the ratio between the monitor surface and the actual display could also be relevant for some enthusiasts. This ratio represents the general relationship between non-display and display. In other words: Approximately 82.6 % of the front surface of the monitor consists of the display, while the remaining percent consists of screen edges and is not suitable for image reproduction. If you want to place several monitors next to each other, you should make sure you choose models with the narrowest possible edges. The display is a IPS panel. The panel has a resolution of 1920 x 1200 px. The pixel density is 94 ppi. The pixel pitch is 0.27 mm. The continuous possible brightness specified by the manufacturer BenQ is 300 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. BenQ promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the BL2411PT 30 khz to 83 khz. Vertically, however, the image renews at a minimum rate of 50 hz up to 76 hz. The minimum response time of the monitor is ms. The maximum response time of the monitor is ms. The display panel is Anti-glare/Matte (3H).
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. The coverage of the Adobe RGB 1998 color space is 75 % according to the manufacturer. According to the manufacturer, the coverage of the SRGB color space is 100 %.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from BenQ has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 20000000 : 1 of dynamic contrast ratio for the monitor BL2411PT cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.
HDR
The monitor supports all HDR modes listed here:
screen design
For the installation of the monitor, a space requirement of approximately 36.6 cm in height, 55.5 cm in width and 6.3 cm in depth is to be assumed.
The size of the BL2411PT on the desk is likely to be particularly relevant for most users. BenQ specifies a space requirement of 44.3 x 55.5 x 23.5 cm (HxWxD) with the included stand. If you want to place the monitor on a table or even transport it, you should expect a weight of 6.7 kg with the stand screwed in. A height-adjustable stand ensures an improved ergonomic posture during use. The monitor can be moved to a maximum height of 13 cm. This value is always measured from the bottom edge of the screen.
Rotate, tilt and swivel
The monitor from BenQ has a pivot function and can thus be rotated using the included stand. A rotation to the left is possible with up to 0 degree. To the right, the monitor can be rotated by 90 degree. The BL2411PT can be swiveled when mounted on the included stand. Pivoting to the left is possible up to 45 degree. Pivoting to the right is possible up to 45 degree. The tilt of the monitor BL2411PT can be individually adjusted to optimize the viewing angle and increase comfort during use. The angle of inclination to the rear is 20. The monitor can be tilted forward by 5 degree.
Ports
The monitor can be connected via 1 VGA ports.
camera
This monitor does not have a camera.
Loudspeaker
Features
- Flicker Free: BenQ 's Flicker Free technology minimizes distracting screen flicker, allowing you to work and/or play longer without restrictions.
- The display/monitor supports Frame Rate Compensation.
Panel manufacturer
Many manufacturers of monitors and TVs fall back on third-party manufacturers, such as Samsung or LG, when choosing the actual display (panel). Thus, many of the monitors have the same panel and, conversely, differ only in their design, additional functionalities, the software used and, of course, the price. Two monitors from BenQ or another manufacturer with an identical panel do not necessarily have to have the same picture quality, but it is usually a first indicator for a purchase decision. The panel used here is originally from LG Display and has the model number LM240WU8-SLD1.
WiFi / Bluetooth
Power consumption
On average, the monitor consumes approximately 23 w. In standby mode, the device consumes approximately 0.5 w. When switched off, on the other hand, the monitor consumes only 0.3 w. In ECO mode, the monitor consumes 15 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
The monitor has a built-in ambient light sensor, which can be used, for example, to dynamically adjust the brightness of the monitor to the ambient conditions. For temperature, the maximum permissible ambient temperature is 40 °C. Below a temperature of 5 °C , the monitor from BenQ should again not be used. The humidity must not exceed 90 percent. At least, however, 20 percent humidity. The monitor may be stored at a maximum humidity of 90 percent. The minimum humidity during storage should not fall below 10 percent. The maximum storage temperature should be according to BenQ 60 °C. Minimal were given by BenQ -20 °C.
Packaging
The monitor is packaged in a cardboard box measuring 43.6 x 66 x 25 cm (height x width x depth). The box together with the monitor weighs about 9 kg.
Additional information