Menu

BenQ BL2211M

Product image for BL2211M

Display, power consumption, dimensions, technologies used, connections, certifications, comfort features. All these keywords can be relevant for a purchase decision, but an exact comparison is often difficult. For this reason, we will summarize as many of the mentioned specifications as possible in an understandable form in the course of this article. Let's start with the most important component of the BL2211M from BenQ.

Display

Videos and/or other applications can be displayed on the monitor's 22 inches ( 55.8 cm on the diagonal). The size specification of a monitor refers to the screen diagonal, which is usually specified in inches. It is only comparable to a limited extent for different formats. For example, a conventional 4:3 monitor with the same screen diagonal has 6% less width, but 13% more height and a total of 7% more surface area than a monitor in 16:10 format. Despite the difference in working area, wider monitors are better suited for consuming games or current movies, for example. It is also easier to display several documents simultaneously on widescreen monitors. So, it depends on the current use case whether the aspect ratio of 1.6 : 1 makes sense for the intended use case. In addition to the aspect ratios and the specified screen diagonal, the ratio between the monitor surface and the actual display could also be relevant for some enthusiasts. This ratio represents the general relationship between non-display and display. In other words: Approximately 77.1 % of the front surface of the monitor consists of the display, while the remaining percent consists of screen edges and is not suitable for image reproduction. If you want to place several monitors next to each other, you should make sure you choose models with the narrowest possible edges. The display is a TN panel. The panel has a resolution of 1680 x 1050 px. The pixel density is 90 ppi. The pixel pitch is 0.282 mm. The continuous possible brightness specified by the manufacturer BenQ is 250 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 170 ° (horizontal) viewing angle. BenQ promises stable color reproduction moreover within a 160 ° vertical angle. The refresh rate is horizontally seen at the BL2211M 30 khz to 83 khz. Vertically, however, the image renews at a minimum rate of 50 hz up to 76 hz. The minimum response time of the monitor is ms. The display panel is Anti-glare/Matte (3H).

Color space

The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. According to the manufacturer, the coverage of the NTSC 1953 color space is 72 %.

Contrast ratio

Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from BenQ has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 12000000 : 1 of dynamic contrast ratio for the monitor BL2211M cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.

HDR

The monitor supports all HDR modes listed here:

screen design

BenQ Specifies the following dimensions for the monitor BL2211M without stand/feet: 34.8 cm x 52.2 cm x 6 cm (HxWxD)
The size of the BL2211M on the desk is likely to be particularly relevant for most users. BenQ specifies a space requirement of 41.4 x 52.2 x 18.3 cm (HxWxD) with the included stand. As for the weight, BenQ states a total weight of 4.2 kg with stand.

Rotate, tilt and swivel

The monitor from BenQ cannot be rotated. The monitor cannot be swiveled. This feature could be retrofitted with a third-party stand. The monitor BL2211M can be tilted. The angle of inclination to the rear is 20. The monitor can be tilted forward by 5 degree.

Ports

The monitor can be connected via 1 VGA ports.

camera

This monitor does not have a camera.

Loudspeaker

The monitor from BenQ has integrated speakers, for playing sounds, music or speech. The sound is emitted via 2 speakers, which are integrated into the device. Each of the built-in speakers has a contingent of 1 w power.

Features

  • Flicker Free: BenQ 's Flicker Free technology minimizes distracting screen flicker, allowing you to work and/or play longer without restrictions.
  • The display/monitor supports Frame Rate Compensation.

Anyone who works a lot on the computer spends many hours a day in front of the screen. Excessive screen work can damage the eyes. This effect can be particularly pronounced during the darker hours and in the winter months. Many monitor manufacturers have now reacted and offer technologies and settings to reduce the blue component, which is primarily controversial. Depending on the manufacturer, these can be called "Low Blue Light", "Low Blue Light Technology", "SoftBlue" or even "Eye Saver Mode" and function differently. However, it is only important that BenQ offers a technology to reduce the blue content in its monitor BL2211M.

Panel manufacturer

Many manufacturers of monitors and TVs fall back on third-party manufacturers, such as Samsung or LG, when choosing the actual display (panel). Thus, many of the monitors have the same panel and, conversely, differ only in their design, additional functionalities, the software used and, of course, the price. Two monitors from BenQ or another manufacturer with an identical panel do not necessarily have to have the same picture quality, but it is usually a first indicator for a purchase decision. The panel used here is originally from Samsung Innolux and has the model number LTM220MT09 (Samsung) M220ZGE-L20 (Innolux).

WiFi / Bluetooth

Power consumption

The average consumption figure for BL2211M is 26 w. In standby mode, the device consumes approximately 0.5 w. When switched off, on the other hand, the monitor consumes only 0.5 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.

Environment

Packaging

Additional information

Has a Vesa Mount (100x100)
Has at least one 3.5mm audio input jack?
Has at least one 3.5mm audio output jack?
Number of 3.5mm audio input jacks
1
Number of 3.5mm audio output jacks
1
Released in year
2013 y
Has a Vesa Mount?

We are missing something - Can you help?