Today we will look at the monitor SW320 from BenQ from the year 2016. Within this article, we will first take a closer look at the most important feature of a monitor -the display-, then the design, and in the next section we will go into the features of the monitor. Of course, power consumption, certifications, connectivity and other important details will also be considered.
Display
The monitor belongs to the device class 31 inches ( 80.1 cm on the diagonal). As already known, two monitors with different outer dimensions can have the same screen diagonal. In the case of the monitor SW320 , we find an aspect ratio of 1.778 to 1. This means that for every 1 pixels in height, 1.778 pixels in width are added. For comparison: A classic CRT monitor had an aspect ratio of 4:3. If you want to pay attention to special aesthetics or simply want to place several monitors next to each other, you should pay attention to the ratio between display and non-display. The SW320 is a monitor with a ratio of 81.8 % between usable and non-usable front surface. The display is a IPS panel. The panel has a resolution of 3840 x 2160 px. The pixel density is 139 ppi. The pixel pitch is 0.182 mm. The continuous possible brightness specified by the manufacturer BenQ is 350 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 178 ° (horizontal) viewing angle. BenQ promises stable color reproduction moreover within a 178 ° vertical angle. The refresh rate is horizontally seen at the SW320 30 khz to 140 khz. Vertically, however, the image renews at a minimum rate of 48 hz up to 76 hz. The minimum response time of the monitor is ms. The maximum response time of the monitor is ms. The average response time of the monitor is about ms. The display panel is Anti-glare/Matte.
Color space
The panel has a bit depth of 10 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. The coverage of the Adobe RGB 1998 color space is 99 % according to the manufacturer. According to the manufacturer, the coverage of the DCI-P3 color space is 87 %. According to the manufacturer, the coverage of the SRGB color space is 100 %.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from BenQ has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 20000000 : 1 of dynamic contrast ratio for the monitor SW320 cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.
HDR
The monitor supports all HDR modes listed here:
- HDR 10
screen design
The following dimensions must be planned for a free-standing stand without attached feet/stand: 44.8 cm x 74.7 cm x 7.2 cm (HxWxD)
The size of the SW320 on the desk is likely to be particularly relevant for most users. BenQ specifies a space requirement of 50.2 x 74.7 x 22.3 cm (HxWxD) with the included stand. The monitor SW320 without the stand weighs 10 kg. This weight reduction should be taken into account for wall or arm mounting, since monitor arms have a maximum load capacity. A height-adjustable stand ensures an improved ergonomic posture during use. The monitor can be moved to a maximum height of 15 cm. This value is always measured from the bottom edge of the screen.
Rotate, tilt and swivel
The monitor from BenQ has a pivot function and can thus be rotated using the included stand. A rotation to the left is possible with up to 0 degree. To the right, the monitor can be rotated by 90 degree. The SW320 can be swiveled when mounted on the included stand. Pivoting to the left is possible up to 45 degree. Pivoting to the right is possible up to 45 degree. The monitor SW320 can be tilted. The angle of inclination to the rear is 20. The monitor can be tilted forward by 5 degree.
Ports
camera
This monitor does not have a camera.
Loudspeaker
Features
- Flicker Free: BenQ 's Flicker Free technology minimizes distracting screen flicker, allowing you to work and/or play longer without restrictions.
- Picture by Picture mode
- Picture in Picture mode
The monitor from BenQ supports the reduction of artifacts within dark image areas, which are caused by compression of the played video files, for example. Depending on the manufacturer, this technology is called Black Boost, Dark Boost, Black Stabilizer, Black Equalizer or Black Enhancement.
Panel manufacturer
Many manufacturers of monitors and TVs fall back on third-party manufacturers, such as Samsung or LG, when choosing the actual display (panel). Thus, many of the monitors have the same panel and, conversely, differ only in their design, additional functionalities, the software used and, of course, the price. Two monitors from BenQ or another manufacturer with an identical panel do not necessarily have to have the same picture quality, but it is usually a first indicator for a purchase decision. The panel used here is originally from Sharp and has the model number LQ315D1JG93.
WiFi / Bluetooth
Power consumption
The average consumption was given by BenQ as 50 w. The maximum power consumption (peak) specified for this monitor is 90 w. In standby mode, the device consumes approximately 0.7 w. When switched off, on the other hand, the monitor consumes only 0.5 w. In ECO mode, the monitor consumes 30 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
Packaging
Additional information