Display, power consumption, dimensions, technologies used, connections, certifications, comfort features. All these keywords can be relevant for a purchase decision, but an exact comparison is often difficult. For this reason, we will summarize as many of the mentioned specifications as possible in an understandable form in the course of this article. Let's start with the most important component of the V246HL bi from Acer.
Display
The monitor belongs to the device class 24 inches ( 60.9 cm on the diagonal). As already known, two monitors with different outer dimensions can have the same screen diagonal. In the case of the monitor V246HL bi , we find an aspect ratio of 1.778 to 1. This means that for every 1 pixels in height, 1.778 pixels in width are added. For comparison: A classic CRT monitor had an aspect ratio of 4:3. Around 83.3 % of the front surface of the monitor consists of the display, while the rest is made up of screen edges that cannot display images. If you want to place several monitors next to each other, it is advisable to prefer those with narrow edges. The display is a TN panel. The panel has a resolution of 1920 x 1080 px. The pixel density is 91 ppi. The pixel pitch is 0.277 mm. The continuous possible brightness specified by the manufacturer Acer is 250 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 170 ° (horizontal) viewing angle. Acer promises stable color reproduction moreover within a 160 ° vertical angle. The refresh rate is horizontally seen at the V246HL bi 30 khz to 80 khz. Vertically, however, the image renews at a minimum rate of 55 hz up to 75 hz. The minimum response time of the monitor is ms. The average response time of the monitor is about ms. The display panel is Anti-glare/Matte (3H).
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors. According to the manufacturer, the coverage of the NTSC 1953 color space is 72 %.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from Acer has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 100000000 : 1 of dynamic contrast ratio for the monitor V246HL bi cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.
HDR
The monitor supports all HDR modes listed here:
screen design
Acer Specifies the following dimensions for the monitor V246HL bi without stand/feet: 33.5 cm x 56.7 cm x 5.2 cm (HxWxD)
If you want to place the monitor described here on the desk without a wall mount, you should allow for 42.2 x 56.7 x 20.6 cm (HxWxD) of space. The device weighs in total (i.e. also measured with the stand) 3.9 kg. According to Acer , you can expect a weight of about 3.5 kg without the stand. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting.
Rotate, tilt and swivel
The monitor from Acer cannot be rotated. The monitor cannot be swiveled. This feature could be retrofitted with a third-party stand. The tilt of the monitor V246HL bi can be individually adjusted to optimize the viewing angle and increase comfort during use. The angle of inclination to the rear is 25. The monitor can be tilted forward by 5 degree.
Ports
The monitor can be connected via 1 VGA ports.
camera
This monitor does not have a camera.
Loudspeaker
Features
- The display/monitor supports Frame Rate Compensation.
WiFi / Bluetooth
Power consumption
The average consumption figure for V246HL bi is 20.9 w. In standby mode, the device consumes approximately 0.45 w. When switched off, on the other hand, the monitor consumes only 0.35 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
Packaging
Additional information