Within this article we will take a closer look at the technical specifications of the V226HQL bbd monitor from Acer. For this we will talk about all possible categories that could be relevant. To start with, we will look at the display, talk about the design and in the next section we will go into the features of the monitor. Other features such as power consumption, connectors and certifications will follow later in the text.
Display
21 inches ( 54.6 cm on the diagonal) offer sufficient space for texts in any office applications, for example. Let's keep it short and sweet. The monitor has an aspect ratio of 1.778 : 1. In addition to the aspect ratios and the specified screen diagonal, the ratio between the monitor surface and the actual display could also be important for some enthusiasts. This ratio describes the general relationship between the non-display area and the display. In other words, approximately 82.2 % of the front surface of the monitor consists of the display, while the remaining percent consists of screen edges and does not enable image reproduction. When setting up several monitors next to each other, it is advisable to prefer models with the narrowest possible edges. The display is a TN panel. The panel has a resolution of 1920 x 1080 px. The pixel density is 102 ppi. The pixel pitch is 0.282 mm. The continuous possible brightness specified by the manufacturer Acer is 200 nt. The panel is illuminated by W-LED. The built-in panel ensures stable color reproduction of the image, even at deviating viewing angles, by means of its 170 ° (horizontal) viewing angle. Acer promises stable color reproduction moreover within a 160 ° vertical angle. The refresh rate is horizontally seen at the V226HQL bbd 65 khz to 65 khz. Vertically, however, the image renews at a minimum rate of 60 hz up to 60 hz. The minimum response time of the monitor is ms. The maximum response time of the monitor is ms. The average response time of the monitor is about ms. The display panel is Anti-glare/Matte.
Color space
The panel has a bit depth of 8 per color channel, but what does that mean? The number of bits determines how many colors can be encoded for the individual pixels of the display. For an 8-bit panel, for example, this is 256 different colors (2^8 = 256). However, since we usually display three different colors per pixel at the same time, in theory about 16 million (256^3) different colors are possible by mixing the three pixels. A 10-bit panel could even display a billion colors.
Contrast ratio
Contrast ratio is a common measurement used to represent the maximum relative differences in brightness between black and white. It describes the ability of a screen or projector to produce a high-contrast image and is the quotient of the maximum and minimum displayable luminance. The higher the values are away from each other, the stronger the quantitatively seen difference between black and white is set up, which in turn results in an improved image quality. This monitor from Acer has a static contrast ratio of 1000 : 1 , according to the manufacturer. In contrast to the static contrast ratio, the dynamic contrast ratio changes the brightness of the panel itself in addition to the difference measurement from black to white. In addition to the difference between the brightest and the darkest pixel, the backlight is thus changed. Since the brightness of the panel may not be able to be adjusted exactly to a single pixel, a so-called halo effect is possible. The value of 100000000 : 1 of dynamic contrast ratio for the monitor V226HQL bbd cannot provide any information about the severity of the halo effect here. Therefore, it is more useful to compare the static contrast ratio.
HDR
The monitor supports all HDR modes listed here:
screen design
The monitor has a width of 50.8 cm without its attached stand/stand. The height is dimensioned at about 30.5 cm , while the for the depth of the monitor should be kept free at about 5.1 cm.
The size of the V226HQL bbd on the desk is likely to be particularly relevant for most users. Acer specifies a space requirement of 39.1 x 50.8 x 20.6 cm (HxWxD) with the included stand. The device weighs in total (i.e. also measured with the stand) 3.7 kg. According to Acer , you can expect a weight of about 3.2 kg without the stand. Speaking of weight without a stand and thus wall or table mounts. The monitor supports a Vesa mounting.
Rotate, tilt and swivel
The monitor from Acer cannot be rotated. The monitor cannot be swiveled. This feature could be retrofitted with a third-party stand. It is possible to adjust the tilt angle of the monitor V226HQL bbd according to personal preference to ensure ergonomic and comfortable viewing. The angle of inclination to the rear is 25. The monitor can be tilted forward by 5 degree.
Ports
The monitor can be connected via 1 VGA ports.
camera
This monitor does not have a camera.
Loudspeaker
Features
- The display/monitor supports Frame Rate Compensation.
WiFi / Bluetooth
Power consumption
On average, the monitor consumes approximately 8.1 w. The maximum power consumption (peak) specified for this monitor is 9.5 w. In standby mode, the device consumes approximately 0.45 w. When switched off, on the other hand, the monitor consumes only 0.35 w. The monitor can be operated on a 110v power supply. The monitor can be operated on a 220v power supply. The power grid has to supply a frequency of 50 hz to 60 hz.
Environment
The maximum permissible ambient temperature is 40 °C during operation. Below a temperature of 0 °C , the monitor from Acer should again not be used. The humidity must not exceed 80 percent. At least, however, 20 percent humidity. The monitor may be stored at a maximum humidity of 90 percent. The minimum humidity during storage should not fall below 10 percent. The maximum storage temperature should be according to Acer 65 °C. Minimal were given by Acer -20 °C.
Packaging
The box together with the monitor weighs about 4.83 kg.
Additional information