Specifications
In this article, we will list all known specifications for the GU10 White Spot smarthome light from Klyqa. We have categorized this product as Spot.
Communication
Communication between, for example, the smartphone and the smarthome device takes place via one or more of the following technologies:
- Wireless Internet (2.4 GHz)
Supported functions
The following features/functions are supported by this device:
- Switch the light on or off via your smartphone or the Bridge.
- Change the brightness.
- Adjustment of the color temperature settings to warm or cool shades of white.
- The lamp can be adjusted so that it shines in a clear white.
- Automatic switch-on behavior.
Third party integrations
Don't want to use the integration/bridge that the manufacturer Klyqa specifies? That's not a problem. See the list below for all verified integrations that work with GU10 White Spot :
Light
With many lamps, the color temperature can be adjusted via app. In this model, the color temperature ranges from 2700 kelvin to 6500 kelvin. The lumen specification describes the brightness of the illuminant. The higher this value is, the brighter the room is illuminated. A 60W incandescent bulb has an average of about 700 lumens, a 60W halogen tube as well. The smart bulb under consideration here emits about 350 lumen according to the manufacturer's information from Klyqa. Klyqa has defined the power consumption for the devices described here with 5 w. However, the specification may differ from the actual power consumption depending on which colors/color temperatures and brightnesses are set. For example, while manufacturers mostly measure lumens at white color and full brightness, the power consumption might have been measured at slight dimming. However, it would also be possible to measure at full brightness, which could lower the power consumption at 5 w. In short, this is an approximate guide from Klyqa.
Design
Unfortunately, in this case, we have to start with bad news regarding the design, because the sustainability aspect was neglected in the light sources installed in the device. The manufacturer did not take the replacement of the bulbs into account, which means that the entire device has to be replaced. Klyqa opted for Aluminium as the housing material and presented it in the color white. The device has a weight of 36 g.
Protection
Make sure that these lights do not come into contact with water, dust or mechanical influences, as the GU10 White Spot does not have IP certification.